Special Purpose Oven in Nashik, Maharashtra
SEW Surface Coating Pvt. Ltd. designs and manufactures special purpose industrial ovens up to 800°C for manufacturers in Nashik, Maharashtra. Every plant is built at our own works in Pune, Maharashtra, then erected and commissioned at your site in Nashik.
Beyond coating lines, we build ovens for heat processes such as baking after flux, bonding, stress relieving and annealing. Each oven is designed around your component, temperature cycle and loading method, whether batch or conveyorised.
- Up to 800°C
- Batch & Conveyorised
- Custom Built
- Supplied across Nashik
Special Purpose Ovens for Nashik's Manufacturing Industry
Nashik is a major automotive and electrical manufacturing centre in north Maharashtra. Satpur and Ambad MIDCs host large vehicle, tractor and electrical equipment plants along with a deep supplier base, and Sinnar and Gonde have added newer engineering units.
In Nashik, demand for special purpose ovens comes mainly from automotive and component makers, electrical and panel makers and agricultural equipment makers. Heat processes need accurate temperature, even air circulation and a loading method that suits the part. A purpose-built oven gives repeatable results and lower energy use than an off-the-shelf unit.
Component makers here supply OEMs in Nashik, Pune and Aurangabad, and many add in-house finishing to meet OEM quality norms. Nashik is about 210 km from our Pune works.
Special Purpose Ovens We Supply in Nashik
Baking Oven After Flux
Ovens for baking components after fluxing, with trolley or conveyor loading to suit your process.
Best for: Brazing and soldering lines.
Bonding Oven
Controlled-temperature ovens for bonding processes, available as batch or continuous conveyor ovens.
Best for: Rubber-to-metal, adhesive and friction material bonding.
Stress Relieving Oven
Ovens that heat fabricated or machined components to relieve residual stress before machining or service.
Best for: Welded fabrications and machined parts.
Annealing Oven
High-temperature ovens up to 800°C for annealing, designed to the material and cycle.
Best for: Metal parts that need softening or grain refinement.
How We Design a Special Purpose Oven
Every special purpose oven is engineered to the job:
- Process StudyTemperature, cycle time and component details.
- Heating DesignHeating system and air circulation for even temperature.
- Loading MethodTrolley, rail bogie, mesh belt or overhead conveyor.
- FabricationBuilt and tested at our Pune works.
- CommissioningInstalled and proven at your site.
Temperature range, chamber size and controls are fixed after we study your process.
Other Ovens We Manufacture
Water Drying Oven
Dries parts completely after the final rinse, since moisture left on the surface spoils the finish.
Powder & Paint Curing Ovens
Batch type, conveyorised conventional or camel back ovens with air-circulating blowers for even temperature.
Industries in Nashik That Use Our Special Purpose Ovens
Automotive & Tractors
Satpur and Ambad host vehicle and tractor plants with a large tier-1 and tier-2 base.
Typical requirement: Bonding and stress relieving ovens for auto components.
Electrical Equipment
Switchgear, transformer and electrical component makers are a key part of Nashik's industry.
Typical requirement: Baking and curing ovens for electrical components.
Agricultural Equipment
Implement and agri-machinery makers serve the region's large farming economy.
Typical requirement: Custom oven designed to the process temperature and cycle.
Engineering & Fabrication
Sinnar and Gonde have engineering and fabrication units supplying OEMs.
Typical requirement: Stress relieving ovens for welded fabrications.
Motors & Transformers
Transformer and motor makers need varnishing and coating of windings and tanks.
Typical requirement: Custom oven designed to the process temperature and cycle.
Special Purpose Oven Specifications
| Temperature | Up to 800°C |
|---|---|
| Processes | Baking after flux, bonding, stress relieving, annealing |
| Types | Batch and continuous (conveyorised / mesh belt) |
| Loading | Trolley, rail bogie, mesh belt or overhead conveyor |
| Air circulation | Blowers for even temperature across the chamber |
| Controls | Temperature controllers; PLC on request |
| Scope of supply | Design, manufacturing, erection and commissioning |
Final configuration is fixed after we study your component drawings, production rate and available floor space.
From Our Pune Works to Nashik
Plants for Nashik are fabricated and pre-assembled at our factory in Ranje, Pune, about 210 km away by road. Equipment is dispatched by road and erected at your site by our team, followed by commissioning and trial runs.
- Site visit and study of components, production rate and space
- Plant layout and process design in minimum floor space
- Fabrication and assembly at our Pune factory
- Dispatch, erection and commissioning at your site
- Trial runs and after-sales service support
Why Buyers in Nashik Choose SEW Surface Coating
In-house manufacturing since 1996
Our own fabrication unit in Pune gives one-roof control over design, quality and delivery commitments.
25+ years in coating systems
More than two and a half decades of experience in powder and liquid painting systems for automobile, appliance, electrical, furniture and other industries.
Layouts in minimum space
We specialise in fitting a complete line into the floor space you actually have.
Low running cost
Plants are engineered for low fuel consumption, with options such as camel back ovens, solar-assisted heating and Waste Heat Recovery Systems (WHRS).
Modern technology
Nano-technology spray pretreatment, PLC-controlled transporters and SCADA monitoring are part of our installed base.
Erection to after-sales
We stay with the project from plant purchase through erection, commissioning and service support.
Industrial Areas We Serve in and Around Nashik
Special Purpose Oven in Nashik – Frequently Asked Questions
Do you supply special purpose ovens in Nashik?
Yes. SEW Surface Coating Pvt. Ltd. manufactures special purpose ovens at its factory in Pune and supplies, erects and commissions them for customers across Nashik, Maharashtra.
What temperature can your special purpose ovens reach?
We manufacture special purpose ovens for processes up to 800°C.
Which processes do these ovens handle?
Baking after flux, bonding, stress relieving and annealing, along with other custom heat processes.
Can the oven be conveyorised?
Yes. Depending on the process, we build batch ovens with trolleys or rail bogies, or continuous ovens with mesh belt or overhead conveyors.
Do you also make coating ovens?
Yes. We manufacture water drying ovens, powder and paint curing ovens, and varnish curing ovens.
How is the plant delivered and installed in Nashik?
The plant is fabricated at our Pune works, about 210 km from Nashik by road. It is dispatched to your site, where our team erects and commissions it and carries out trial runs.
How do I get a quotation for a special purpose oven in Nashik?
Send your process type, temperature, component size and weight, and batch or hourly output through our enquiry page, or call +91-99758 35066. Our engineers will prepare a layout and technical offer.
Other Products We Supply in Nashik
Special Purpose Ovens in Other Locations
- Special Purpose Oven in Vapi
- Special Purpose Oven in Thane
- Special Purpose Oven in Mumbai
- Special Purpose Oven in Pimpri-Chinchwad
- Special Purpose Oven in Aurangabad
- Special Purpose Oven in Surat
- Special Purpose Oven in Pune
- Special Purpose Oven in Satara
Special Purpose Ovens – main product page | All locations we serve
Need a Special Purpose Oven in Nashik?
Share your process type, temperature, component size and weight, and batch or hourly output. Our engineers will send a plant layout and technical offer for Nashik.
Send Your Requirement Contact Us