Special Purpose Oven in Thane, Maharashtra
SEW Surface Coating Pvt. Ltd. designs and manufactures special purpose industrial ovens up to 800°C for manufacturers in Thane, Maharashtra. Every plant is built at our own works in Pune, Maharashtra, then erected and commissioned at your site in Thane.
Beyond coating lines, we build ovens for heat processes such as baking after flux, bonding, stress relieving and annealing. Each oven is designed around your component, temperature cycle and loading method, whether batch or conveyorised.
- Up to 800°C
- Batch & Conveyorised
- Custom Built
- Supplied across Thane
Special Purpose Ovens for Thane's Manufacturing Industry
Thane district is one of Maharashtra's busiest manufacturing zones. Wagle Estate and Thane MIDC host engineering and electrical units, while the Ambernath, Badlapur, Dombivli and Murbad MIDCs to the east have grown with chemical, engineering and fabrication industries.
In Thane, demand for special purpose ovens comes mainly from engineering and fabrication units, electrical and panel makers and furniture and storage makers. Heat processes need accurate temperature, even air circulation and a loading method that suits the part. A purpose-built oven gives repeatable results and lower energy use than an off-the-shelf unit.
Many units here run contract coating for larger manufacturers in the Mumbai region. Thane is about 145 km from our Pune works, so our engineers can visit for site studies and service without long lead times.
Special Purpose Ovens We Supply in Thane
Baking Oven After Flux
Ovens for baking components after fluxing, with trolley or conveyor loading to suit your process.
Best for: Brazing and soldering lines.
Bonding Oven
Controlled-temperature ovens for bonding processes, available as batch or continuous conveyor ovens.
Best for: Rubber-to-metal, adhesive and friction material bonding.
Stress Relieving Oven
Ovens that heat fabricated or machined components to relieve residual stress before machining or service.
Best for: Welded fabrications and machined parts.
Annealing Oven
High-temperature ovens up to 800°C for annealing, designed to the material and cycle.
Best for: Metal parts that need softening or grain refinement.
How We Design a Special Purpose Oven
Every special purpose oven is engineered to the job:
- Process StudyTemperature, cycle time and component details.
- Heating DesignHeating system and air circulation for even temperature.
- Loading MethodTrolley, rail bogie, mesh belt or overhead conveyor.
- FabricationBuilt and tested at our Pune works.
- CommissioningInstalled and proven at your site.
Temperature range, chamber size and controls are fixed after we study your process.
Other Ovens We Manufacture
Water Drying Oven
Dries parts completely after the final rinse, since moisture left on the surface spoils the finish.
Powder & Paint Curing Ovens
Batch type, conveyorised conventional or camel back ovens with air-circulating blowers for even temperature.
Industries in Thane That Use Our Special Purpose Ovens
Engineering & Fabrication
Ambernath, Badlapur and Murbad have many fabricators making process equipment and structures.
Typical requirement: Stress relieving ovens for welded fabrications.
Electrical & Control Panels
Wagle Estate and Thane MIDC are home to electrical, panel and instrumentation makers.
Typical requirement: Baking and curing ovens for electrical components.
Steel Furniture & Racking
Bhiwandi's warehousing growth has created demand for racking and storage systems.
Typical requirement: Custom oven designed to the process temperature and cycle.
Pumps & Valves
Pump, valve and fluid-handling equipment makers in the district process castings and fabricated bodies.
Typical requirement: Stress relieving and annealing ovens for castings and machined parts.
Motors & Transformers
Electrical machine and transformer makers in the district need varnishing and finishing.
Typical requirement: Custom oven designed to the process temperature and cycle.
Special Purpose Oven Specifications
| Temperature | Up to 800°C |
|---|---|
| Processes | Baking after flux, bonding, stress relieving, annealing |
| Types | Batch and continuous (conveyorised / mesh belt) |
| Loading | Trolley, rail bogie, mesh belt or overhead conveyor |
| Air circulation | Blowers for even temperature across the chamber |
| Controls | Temperature controllers; PLC on request |
| Scope of supply | Design, manufacturing, erection and commissioning |
Final configuration is fixed after we study your component drawings, production rate and available floor space.
From Our Pune Works to Thane
Plants for Thane are fabricated and pre-assembled at our factory in Ranje, Pune, about 145 km away by road. Equipment is dispatched by road and erected at your site by our team, followed by commissioning and trial runs.
- Site visit and study of components, production rate and space
- Plant layout and process design in minimum floor space
- Fabrication and assembly at our Pune factory
- Dispatch, erection and commissioning at your site
- Trial runs and after-sales service support
Why Buyers in Thane Choose SEW Surface Coating
In-house manufacturing since 1996
Our own fabrication unit in Pune gives one-roof control over design, quality and delivery commitments.
25+ years in coating systems
More than two and a half decades of experience in powder and liquid painting systems for automobile, appliance, electrical, furniture and other industries.
Layouts in minimum space
We specialise in fitting a complete line into the floor space you actually have.
Low running cost
Plants are engineered for low fuel consumption, with options such as camel back ovens, solar-assisted heating and Waste Heat Recovery Systems (WHRS).
Modern technology
Nano-technology spray pretreatment, PLC-controlled transporters and SCADA monitoring are part of our installed base.
Erection to after-sales
We stay with the project from plant purchase through erection, commissioning and service support.
Industrial Areas We Serve in and Around Thane
Special Purpose Oven in Thane – Frequently Asked Questions
Do you supply special purpose ovens in Thane?
Yes. SEW Surface Coating Pvt. Ltd. manufactures special purpose ovens at its factory in Pune and supplies, erects and commissions them for customers across Thane, Maharashtra.
What temperature can your special purpose ovens reach?
We manufacture special purpose ovens for processes up to 800°C.
Which processes do these ovens handle?
Baking after flux, bonding, stress relieving and annealing, along with other custom heat processes.
Can the oven be conveyorised?
Yes. Depending on the process, we build batch ovens with trolleys or rail bogies, or continuous ovens with mesh belt or overhead conveyors.
Do you also make coating ovens?
Yes. We manufacture water drying ovens, powder and paint curing ovens, and varnish curing ovens.
How is the plant delivered and installed in Thane?
The plant is fabricated at our Pune works, about 145 km from Thane by road. It is dispatched to your site, where our team erects and commissions it and carries out trial runs.
How do I get a quotation for a special purpose oven in Thane?
Send your process type, temperature, component size and weight, and batch or hourly output through our enquiry page, or call +91-99758 35066. Our engineers will prepare a layout and technical offer.
Other Products We Supply in Thane
Special Purpose Ovens in Other Locations
- Special Purpose Oven in Mumbai
- Special Purpose Oven in Pimpri-Chinchwad
- Special Purpose Oven in Pune
- Special Purpose Oven in Nashik
- Special Purpose Oven in Vapi
- Special Purpose Oven in Satara
- Special Purpose Oven in Surat
- Special Purpose Oven in Aurangabad
Special Purpose Ovens – main product page | All locations we serve
Need a Special Purpose Oven in Thane?
Share your process type, temperature, component size and weight, and batch or hourly output. Our engineers will send a plant layout and technical offer for Thane.
Send Your Requirement Contact Us