Special Purpose Oven in Chhatrapati Sambhajinagar (Aurangabad), Maharashtra
SEW Surface Coating Pvt. Ltd. designs and manufactures special purpose industrial ovens up to 800°C for manufacturers in Aurangabad, Maharashtra. Every plant is built at our own works in Pune, Maharashtra, then erected and commissioned at your site in Aurangabad.
Beyond coating lines, we build ovens for heat processes such as baking after flux, bonding, stress relieving and annealing. Each oven is designed around your component, temperature cycle and loading method, whether batch or conveyorised.
- Up to 800°C
- Batch & Conveyorised
- Custom Built
- Supplied across Aurangabad
Special Purpose Ovens for Aurangabad's Manufacturing Industry
Chhatrapati Sambhajinagar (Aurangabad) is one of Maharashtra's biggest auto and engineering hubs. Waluj MIDC alone hosts two-wheeler, three-wheeler and component plants, while Chikalthana, Shendra and the AURIC industrial city at Shendra–Bidkin are attracting new manufacturers.
In Aurangabad, demand for special purpose ovens comes mainly from automotive and component makers, engineering and fabrication units and appliance and HVAC makers. Heat processes need accurate temperature, even air circulation and a loading method that suits the part. A purpose-built oven gives repeatable results and lower energy use than an off-the-shelf unit.
The city's large tier-2 and tier-3 supplier base increasingly invests in its own finishing lines. Aurangabad is about 235 km from our Pune works by road.
Special Purpose Ovens We Supply in Aurangabad
Baking Oven After Flux
Ovens for baking components after fluxing, with trolley or conveyor loading to suit your process.
Best for: Brazing and soldering lines.
Bonding Oven
Controlled-temperature ovens for bonding processes, available as batch or continuous conveyor ovens.
Best for: Rubber-to-metal, adhesive and friction material bonding.
Stress Relieving Oven
Ovens that heat fabricated or machined components to relieve residual stress before machining or service.
Best for: Welded fabrications and machined parts.
Annealing Oven
High-temperature ovens up to 800°C for annealing, designed to the material and cycle.
Best for: Metal parts that need softening or grain refinement.
How We Design a Special Purpose Oven
Every special purpose oven is engineered to the job:
- Process StudyTemperature, cycle time and component details.
- Heating DesignHeating system and air circulation for even temperature.
- Loading MethodTrolley, rail bogie, mesh belt or overhead conveyor.
- FabricationBuilt and tested at our Pune works.
- CommissioningInstalled and proven at your site.
Temperature range, chamber size and controls are fixed after we study your process.
Other Ovens We Manufacture
Water Drying Oven
Dries parts completely after the final rinse, since moisture left on the surface spoils the finish.
Powder & Paint Curing Ovens
Batch type, conveyorised conventional or camel back ovens with air-circulating blowers for even temperature.
Industries in Aurangabad That Use Our Special Purpose Ovens
Two & Three-Wheelers
Waluj is a major two- and three-wheeler hub with a large component supplier base.
Typical requirement: Bonding and stress relieving ovens for auto components.
Engineering & Fabrication
Fabricators and machine shops in Waluj and Chikalthana supply OEMs across Maharashtra.
Typical requirement: Stress relieving ovens for welded fabrications.
Appliances & Consumer Durables
Appliance and consumer-durable makers in Shendra and Chikalthana process sheet-metal parts.
Typical requirement: Flux baking ovens for brazed heat-exchanger and HVAC parts.
Agricultural Equipment
Implement and irrigation equipment makers serve the Marathwada region.
Typical requirement: Custom oven designed to the process temperature and cycle.
Electrical & Panels
Electrical equipment and panel makers need consistent enclosure finishes.
Typical requirement: Baking and curing ovens for electrical components.
Special Purpose Oven Specifications
| Temperature | Up to 800°C |
|---|---|
| Processes | Baking after flux, bonding, stress relieving, annealing |
| Types | Batch and continuous (conveyorised / mesh belt) |
| Loading | Trolley, rail bogie, mesh belt or overhead conveyor |
| Air circulation | Blowers for even temperature across the chamber |
| Controls | Temperature controllers; PLC on request |
| Scope of supply | Design, manufacturing, erection and commissioning |
Final configuration is fixed after we study your component drawings, production rate and available floor space.
From Our Pune Works to Aurangabad
Plants for Aurangabad are fabricated and pre-assembled at our factory in Ranje, Pune, about 235 km away by road. Equipment is dispatched by road and erected at your site by our team, followed by commissioning and trial runs.
- Site visit and study of components, production rate and space
- Plant layout and process design in minimum floor space
- Fabrication and assembly at our Pune factory
- Dispatch, erection and commissioning at your site
- Trial runs and after-sales service support
Why Buyers in Aurangabad Choose SEW Surface Coating
In-house manufacturing since 1996
Our own fabrication unit in Pune gives one-roof control over design, quality and delivery commitments.
25+ years in coating systems
More than two and a half decades of experience in powder and liquid painting systems for automobile, appliance, electrical, furniture and other industries.
Layouts in minimum space
We specialise in fitting a complete line into the floor space you actually have.
Low running cost
Plants are engineered for low fuel consumption, with options such as camel back ovens, solar-assisted heating and Waste Heat Recovery Systems (WHRS).
Modern technology
Nano-technology spray pretreatment, PLC-controlled transporters and SCADA monitoring are part of our installed base.
Erection to after-sales
We stay with the project from plant purchase through erection, commissioning and service support.
Industrial Areas We Serve in and Around Aurangabad
Special Purpose Oven in Aurangabad – Frequently Asked Questions
Do you supply special purpose ovens in Aurangabad?
Yes. SEW Surface Coating Pvt. Ltd. manufactures special purpose ovens at its factory in Pune and supplies, erects and commissions them for customers across Aurangabad, Maharashtra.
What temperature can your special purpose ovens reach?
We manufacture special purpose ovens for processes up to 800°C.
Which processes do these ovens handle?
Baking after flux, bonding, stress relieving and annealing, along with other custom heat processes.
Can the oven be conveyorised?
Yes. Depending on the process, we build batch ovens with trolleys or rail bogies, or continuous ovens with mesh belt or overhead conveyors.
Do you also make coating ovens?
Yes. We manufacture water drying ovens, powder and paint curing ovens, and varnish curing ovens.
How is the plant delivered and installed in Aurangabad?
The plant is fabricated at our Pune works, about 235 km from Aurangabad by road. It is dispatched to your site, where our team erects and commissions it and carries out trial runs.
How do I get a quotation for a special purpose oven in Aurangabad?
Send your process type, temperature, component size and weight, and batch or hourly output through our enquiry page, or call +91-99758 35066. Our engineers will prepare a layout and technical offer.
Other Products We Supply in Aurangabad
Special Purpose Ovens in Other Locations
- Special Purpose Oven in Nashik
- Special Purpose Oven in Pimpri-Chinchwad
- Special Purpose Oven in Pune
- Special Purpose Oven in Thane
- Special Purpose Oven in Vapi
- Special Purpose Oven in Mumbai
- Special Purpose Oven in Satara
- Special Purpose Oven in Surat
Special Purpose Ovens – main product page | All locations we serve
Need a Special Purpose Oven in Aurangabad?
Share your process type, temperature, component size and weight, and batch or hourly output. Our engineers will send a plant layout and technical offer for Aurangabad.
Send Your Requirement Contact Us