Varnish Plant in Chhatrapati Sambhajinagar (Aurangabad), Maharashtra
SEW Surface Coating Pvt. Ltd. designs, manufactures and installs varnishing plants for manufacturers in Aurangabad, Maharashtra. Every plant is built at our own works in Pune, Maharashtra, then erected and commissioned at your site in Aurangabad.
Varnish is a chemical used to insulate electrical goods such as motor windings, stators and transformer coils. A varnishing plant pre-heats the article in a moisture drying oven, dips it in varnish and then cures it in a varnish curing oven. Both ovens have solvent exhaust to maintain the LEL level.
- Moisture Drying Oven
- Varnish Curing Oven
- Solvent LEL Exhaust
- Supplied across Aurangabad
Varnish Plants for Aurangabad's Manufacturing Industry
Chhatrapati Sambhajinagar (Aurangabad) is one of Maharashtra's biggest auto and engineering hubs. Waluj MIDC alone hosts two-wheeler, three-wheeler and component plants, while Chikalthana, Shendra and the AURIC industrial city at Shendra–Bidkin are attracting new manufacturers.
In Aurangabad, demand for varnish plants comes mainly from automotive and component makers, engineering and fabrication units and appliance and HVAC makers. Electrical windings must be free of moisture before they are varnished, and the varnish must be cured fully to give reliable insulation. Ovens with even air circulation and controlled temperature do both, batch after batch.
The city's large tier-2 and tier-3 supplier base increasingly invests in its own finishing lines. Aurangabad is about 235 km from our Pune works by road.
Varnish Plant Equipment We Supply in Aurangabad
Moisture Drying Oven
An enclosed insulated chamber with an air-circulating blower and electrical heater. It heats the article before it is dipped in varnish, so moisture is driven out of the winding.
- Air circulation for even temperature
- Electrical heating
- Solvent evaporation exhaust to maintain LEL level
Varnish Curing Oven
After dipping in varnish, the article travels through this oven for a set time so the varnish cures on it. The chamber has an air-circulating blower with electrical heater.
- Air circulation for even temperature
- Electrical heating
- Solvent evaporation exhaust to maintain LEL level
Typical Varnishing Process
A standard varnishing line follows this sequence:
- LoadingWindings, stators or coils are loaded on trays or the conveyor.
- Moisture DryingPre-heating drives moisture out of the winding.
- Varnish DippingThe hot article is dipped in varnish.
- DrainingExcess varnish drips off before curing.
- Varnish CuringThe article is baked until the varnish cures.
- Cooling & UnloadingParts cool and are inspected.
Oven size, temperature and residence time are set to your varnish type and the size of your windings.
Industries in Aurangabad That Use Our Varnish Plants
Two & Three-Wheelers
Waluj is a major two- and three-wheeler hub with a large component supplier base.
Typical requirement: Varnishing of alternator, starter and EV motor windings.
Engineering & Fabrication
Fabricators and machine shops in Waluj and Chikalthana supply OEMs across Maharashtra.
Typical requirement: Varnish plant for electrical windings and coils.
Appliances & Consumer Durables
Appliance and consumer-durable makers in Shendra and Chikalthana process sheet-metal parts.
Typical requirement: Conveyorised varnishing for fan, pump and compressor motors.
Agricultural Equipment
Implement and irrigation equipment makers serve the Marathwada region.
Typical requirement: Varnish plant for electrical windings and coils.
Electrical & Panels
Electrical equipment and panel makers need consistent enclosure finishes.
Typical requirement: Varnish curing ovens for transformer coils and electrical windings.
Varnish Plant Specifications
| Equipment | Moisture drying oven, varnish dipping and varnish curing oven |
|---|---|
| Construction | Enclosed insulated chamber |
| Heating | Electrical heaters with air-circulating blowers |
| Safety | Solvent evaporation exhaust system to maintain LEL level |
| Material handling | Trays, trolley or conveyor |
| Controls | Temperature controllers; PLC on request |
| Scope of supply | Design, manufacturing, erection and commissioning |
Final configuration is fixed after we study your component drawings, production rate and available floor space.
From Our Pune Works to Aurangabad
Plants for Aurangabad are fabricated and pre-assembled at our factory in Ranje, Pune, about 235 km away by road. Equipment is dispatched by road and erected at your site by our team, followed by commissioning and trial runs.
- Site visit and study of components, production rate and space
- Plant layout and process design in minimum floor space
- Fabrication and assembly at our Pune factory
- Dispatch, erection and commissioning at your site
- Trial runs and after-sales service support
Why Buyers in Aurangabad Choose SEW Surface Coating
In-house manufacturing since 1996
Our own fabrication unit in Pune gives one-roof control over design, quality and delivery commitments.
25+ years in coating systems
More than two and a half decades of experience in powder and liquid painting systems for automobile, appliance, electrical, furniture and other industries.
Layouts in minimum space
We specialise in fitting a complete line into the floor space you actually have.
Low running cost
Plants are engineered for low fuel consumption, with options such as camel back ovens, solar-assisted heating and Waste Heat Recovery Systems (WHRS).
Modern technology
Nano-technology spray pretreatment, PLC-controlled transporters and SCADA monitoring are part of our installed base.
Erection to after-sales
We stay with the project from plant purchase through erection, commissioning and service support.
Industrial Areas We Serve in and Around Aurangabad
Varnish Plant in Aurangabad – Frequently Asked Questions
Do you supply varnish plants in Aurangabad?
Yes. SEW Surface Coating Pvt. Ltd. manufactures varnish plants at its factory in Pune and supplies, erects and commissions them for customers across Aurangabad, Maharashtra.
What is a varnish plant used for?
It insulates electrical goods such as motor windings, stators and transformer coils. The plant pre-heats the article, dips it in varnish and cures the varnish in an oven.
Why is a moisture drying oven needed?
Windings absorb moisture. The moisture drying oven heats the article before dipping so moisture is driven out and the varnish penetrates and bonds properly.
Are the ovens safe for solvent-based varnish?
Yes. Both ovens have a solvent evaporation exhaust system that keeps solvent concentration below the lower explosive limit (LEL).
Do you make other special ovens?
Yes. We also build special purpose ovens up to 800°C for baking, bonding, stress relieving and annealing.
How is the plant delivered and installed in Aurangabad?
The plant is fabricated at our Pune works, about 235 km from Aurangabad by road. It is dispatched to your site, where our team erects and commissions it and carries out trial runs.
How do I get a quotation for a varnish plant in Aurangabad?
Send your winding or coil size and weight, varnish type and batch or hourly output through our enquiry page, or call +91-99758 35066. Our engineers will prepare a layout and technical offer.
Other Products We Supply in Aurangabad
Need a Varnish Plant in Aurangabad?
Share your winding or coil size and weight, varnish type and batch or hourly output. Our engineers will send a plant layout and technical offer for Aurangabad.
Send Your Requirement Contact Us