Special Purpose Oven in Ahmedabad, Gujarat
SEW Surface Coating Pvt. Ltd. designs and manufactures special purpose industrial ovens up to 800°C for manufacturers in Ahmedabad, Gujarat. Every plant is built at our own works in Pune, Maharashtra, then erected and commissioned at your site in Ahmedabad.
Beyond coating lines, we build ovens for heat processes such as baking after flux, bonding, stress relieving and annealing. Each oven is designed around your component, temperature cycle and loading method, whether batch or conveyorised.
- Up to 800°C
- Batch & Conveyorised
- Custom Built
- Supplied across Ahmedabad
Special Purpose Ovens for Ahmedabad's Manufacturing Industry
Ahmedabad is one of Gujarat's largest manufacturing centres. Engineering and fabrication units are concentrated in the Naroda, Vatva, Odhav and Kathwada GIDC estates, while the Sanand and Changodar belt to the west has grown into an important automotive and auto-component hub.
In Ahmedabad, demand for special purpose ovens comes mainly from automotive and component makers, engineering and fabrication units and electrical and panel makers. Heat processes need accurate temperature, even air circulation and a loading method that suits the part. A purpose-built oven gives repeatable results and lower energy use than an off-the-shelf unit.
Many of these units coat or paint what they make, from automotive parts and electrical enclosures to steel furniture, pumps and machinery. Ahmedabad is about 660 km from our Pune works by road.
Special Purpose Ovens We Supply in Ahmedabad
Baking Oven After Flux
Ovens for baking components after fluxing, with trolley or conveyor loading to suit your process.
Best for: Brazing and soldering lines.
Bonding Oven
Controlled-temperature ovens for bonding processes, available as batch or continuous conveyor ovens.
Best for: Rubber-to-metal, adhesive and friction material bonding.
Stress Relieving Oven
Ovens that heat fabricated or machined components to relieve residual stress before machining or service.
Best for: Welded fabrications and machined parts.
Annealing Oven
High-temperature ovens up to 800°C for annealing, designed to the material and cycle.
Best for: Metal parts that need softening or grain refinement.
How We Design a Special Purpose Oven
Every special purpose oven is engineered to the job:
- Process StudyTemperature, cycle time and component details.
- Heating DesignHeating system and air circulation for even temperature.
- Loading MethodTrolley, rail bogie, mesh belt or overhead conveyor.
- FabricationBuilt and tested at our Pune works.
- CommissioningInstalled and proven at your site.
Temperature range, chamber size and controls are fixed after we study your process.
Other Ovens We Manufacture
Water Drying Oven
Dries parts completely after the final rinse, since moisture left on the surface spoils the finish.
Powder & Paint Curing Ovens
Batch type, conveyorised conventional or camel back ovens with air-circulating blowers for even temperature.
Industries in Ahmedabad That Use Our Special Purpose Ovens
Automotive & Auto Components
Sanand and the Bechraji-Mandal corridor host vehicle plants and a growing base of component suppliers.
Typical requirement: Bonding and stress relieving ovens for auto components.
Engineering & Fabrication
Naroda, Vatva and Odhav GIDCs have a large number of machine shops and fabricators making frames, brackets and machinery parts.
Typical requirement: Stress relieving ovens for welded fabrications.
Electrical Panels & Enclosures
Panel builders and switchgear makers across Odhav and Rakhial process sheet-metal enclosures in large volumes.
Typical requirement: Baking and curing ovens for electrical components.
Steel Furniture & Storage
Office furniture, racking and storage system makers need consistent finishes on sheet-metal parts.
Typical requirement: Custom oven designed to the process temperature and cycle.
Pumps, Motors & Agri Equipment
Gujarat's pump, motor and farm-equipment makers coat castings and fabricated bodies that must resist moisture.
Typical requirement: Stress relieving and annealing ovens for castings and machined parts.
Home Appliances & HVAC
Cooler, fan and HVAC component makers need durable, corrosion-resistant coated sheet metal.
Typical requirement: Flux baking ovens for brazed heat-exchanger and HVAC parts.
Special Purpose Oven Specifications
| Temperature | Up to 800°C |
|---|---|
| Processes | Baking after flux, bonding, stress relieving, annealing |
| Types | Batch and continuous (conveyorised / mesh belt) |
| Loading | Trolley, rail bogie, mesh belt or overhead conveyor |
| Air circulation | Blowers for even temperature across the chamber |
| Controls | Temperature controllers; PLC on request |
| Scope of supply | Design, manufacturing, erection and commissioning |
Final configuration is fixed after we study your component drawings, production rate and available floor space.
From Our Pune Works to Ahmedabad
Plants for Ahmedabad are fabricated and pre-assembled at our factory in Ranje, Pune, about 660 km away by road. Equipment is dispatched by road and erected at your site by our team, followed by commissioning and trial runs.
- Site visit and study of components, production rate and space
- Plant layout and process design in minimum floor space
- Fabrication and assembly at our Pune factory
- Dispatch, erection and commissioning at your site
- Trial runs and after-sales service support
Why Buyers in Ahmedabad Choose SEW Surface Coating
In-house manufacturing since 1996
Our own fabrication unit in Pune gives one-roof control over design, quality and delivery commitments.
25+ years in coating systems
More than two and a half decades of experience in powder and liquid painting systems for automobile, appliance, electrical, furniture and other industries.
Layouts in minimum space
We specialise in fitting a complete line into the floor space you actually have.
Low running cost
Plants are engineered for low fuel consumption, with options such as camel back ovens, solar-assisted heating and Waste Heat Recovery Systems (WHRS).
Modern technology
Nano-technology spray pretreatment, PLC-controlled transporters and SCADA monitoring are part of our installed base.
Erection to after-sales
We stay with the project from plant purchase through erection, commissioning and service support.
Industrial Areas We Serve in and Around Ahmedabad
Special Purpose Oven in Ahmedabad – Frequently Asked Questions
Do you supply special purpose ovens in Ahmedabad?
Yes. SEW Surface Coating Pvt. Ltd. manufactures special purpose ovens at its factory in Pune and supplies, erects and commissions them for customers across Ahmedabad, Gujarat.
What temperature can your special purpose ovens reach?
We manufacture special purpose ovens for processes up to 800°C.
Which processes do these ovens handle?
Baking after flux, bonding, stress relieving and annealing, along with other custom heat processes.
Can the oven be conveyorised?
Yes. Depending on the process, we build batch ovens with trolleys or rail bogies, or continuous ovens with mesh belt or overhead conveyors.
Do you also make coating ovens?
Yes. We manufacture water drying ovens, powder and paint curing ovens, and varnish curing ovens.
How is the plant delivered and installed in Ahmedabad?
The plant is fabricated at our Pune works, about 660 km from Ahmedabad by road. It is dispatched to your site, where our team erects and commissions it and carries out trial runs.
How do I get a quotation for a special purpose oven in Ahmedabad?
Send your process type, temperature, component size and weight, and batch or hourly output through our enquiry page, or call +91-99758 35066. Our engineers will prepare a layout and technical offer.
Other Products We Supply in Ahmedabad
Special Purpose Ovens in Other Locations
- Special Purpose Oven in Vadodara
- Special Purpose Oven in Rajkot
- Special Purpose Oven in Surat
- Special Purpose Oven in Vapi
- Special Purpose Oven in Indore
- Special Purpose Oven in Nashik
- Special Purpose Oven in Thane
- Special Purpose Oven in Mumbai
Special Purpose Ovens – main product page | All locations we serve
Need a Special Purpose Oven in Ahmedabad?
Share your process type, temperature, component size and weight, and batch or hourly output. Our engineers will send a plant layout and technical offer for Ahmedabad.
Send Your Requirement Contact Us