Pressurization Zone in Pimpri-Chinchwad, Maharashtra
SEW Surface Coating Pvt. Ltd. designs, manufactures and installs pressurization zones (pressurization chambers) for manufacturers in Pimpri-Chinchwad. Our factory is right here in Pune district, at Ranje on Kondhanpur Road, so Pimpri-Chinchwad buyers deal directly with the manufacturer, with no dealer in between.
A pressurization chamber is built around the powder coating booth or paint booth to keep dust off the components. Atmospheric fresh air is drawn in, filtered in two or three stages and delivered from a plenum chamber around the booth area, so the room stays under positive pressure.
- 2 or 3-Stage Filtration
- Powder & Paint Booths
- Dust-Free Finish
- Factory in Pune
Pressurization Zones for Pimpri-Chinchwad's Manufacturing Industry
Pimpri-Chinchwad is the industrial heart of the Pune region. The Pimpri, Chinchwad and Bhosari MIDC estates grew around India's early commercial vehicle and two-wheeler plants, and today thousands of small and medium units here machine, press, fabricate and finish components for them.
In Pimpri-Chinchwad, demand for pressurization zones comes mainly from automotive and component makers, engineering and fabrication units and electrical and panel makers. Dust settling on wet paint or uncured powder shows up as specks and craters, and those parts have to be reworked. Keeping the booth area under filtered positive pressure stops outside dust from getting in, which matters most for high-gloss and appearance-critical parts.
Chakan and Talegaon on the city's edge have added large OEM plants and supplier parks. Our factory is in Pune district, so Pimpri-Chinchwad customers can visit the works, and our engineers can reach your site the same day for layout studies and service.
Pressurization Zones We Supply in Pimpri-Chinchwad
Pressurization Chamber for Powder Booths
An enclosed, panelled room around the powder booth with filtered fresh air supplied from a plenum.
Best for: Powder coating lines with appearance-critical parts.
Pressurization Chamber for Paint Booths
The same filtered-air enclosure built around liquid painting booths to keep dust off wet paint.
Best for: Liquid painting lines for high-gloss finishes.
How a Pressurization Zone Works
- Fresh Air IntakeAtmospheric air is drawn in by the supply fan.
- Stage 1 FilterCoarse filtration removes larger dust.
- Stage 2 / 3 FilterFiner filtration cleans the air further.
- Plenum ChamberFiltered air is delivered evenly around the booth.
- Positive PressureRoom pressure keeps outside dust from entering.
Air volume, filter stages and room size are designed around your booth size and conveyor openings.
Equipment Supplied With the Pressurization Zone
Powder Coating Booth
Electrostatic powder booth with mono-cyclone or multi-cyclone recovery and after filter unit.
Liquid Painting Booth
Dry booths, side draft and downdraft water-wall booths, and dip painting tanks with paint curing ovens.
Curing Oven
Batch type, conveyorised conventional or camel back ovens with air-circulating blowers for even temperature.
Pretreatment Plant
Dip or spray pretreatment cleans and phosphates the metal surface so the coating adheres well and resists corrosion.
Industries in Pimpri-Chinchwad That Use Our Pressurization Zones
Commercial Vehicles & Two-Wheelers
The city's OEMs and their tier-1 and tier-2 suppliers produce chassis parts, brackets, tanks and body components.
Typical requirement: Pressurization zone around automated powder or paint booths for visible parts.
Press Shops & Fabricators
Bhosari and Kudalwadi have a large base of press-shop and fabrication units working on contract.
Typical requirement: Pressurization zone sized to the booth and conveyor openings.
Electrical Enclosures
Enclosure and control panel makers in Bhosari and Pimpri need consistent, durable finishes.
Typical requirement: Pressurized booth room for enclosures with high-gloss finishes.
Racking & Storage
Industrial racking, bins and storage system makers process heavy sheet-metal parts.
Typical requirement: Pressurized booth room for furniture with appearance-critical finishes.
Motors & Electricals
Electric motor and electrical machine makers in the MIDC estates need varnishing and finishing.
Typical requirement: Pressurization zone sized to the booth and conveyor openings.
Pressurization Zone Specifications
| Application | Around powder coating booths and paint booths |
|---|---|
| Filtration | Fresh air filtered in two or three stages |
| Air delivery | Plenum chamber around the booth area |
| Construction | Panelled enclosure with doors and conveyor openings |
| Benefit | Dust-free coating and fewer rejections |
| Scope of supply | Design, manufacturing, erection and commissioning |
Final configuration is fixed after we study your component drawings, production rate and available floor space.
Built and Installed Within Pimpri-Chinchwad
Our factory is at Ranje, on Kondhanpur Road in Pune district. Equipment for Pimpri-Chinchwad customers is fabricated and pre-assembled there, delivered to your site by road, and erected and commissioned by our own team.
- Site visit and study of components, production rate and space
- Plant layout designed to fit minimum floor space
- Factory visit to see your plant under fabrication
- Delivery, erection and commissioning at your site
- Trial runs, operator guidance and after-sales service
Why Buyers in Pimpri-Chinchwad Choose SEW Surface Coating
In-house manufacturing since 1996
Our own fabrication unit in Pune gives one-roof control over design, quality and delivery commitments.
25+ years in coating systems
More than two and a half decades of experience in powder and liquid painting systems for automobile, appliance, electrical, furniture and other industries.
Layouts in minimum space
We specialise in fitting a complete line into the floor space you actually have.
Low running cost
Plants are engineered for low fuel consumption, with options such as camel back ovens, solar-assisted heating and Waste Heat Recovery Systems (WHRS).
Modern technology
Nano-technology spray pretreatment, PLC-controlled transporters and SCADA monitoring are part of our installed base.
Quick local service
With our team based in Pune, site visits, trouble-shooting and spares support for Pimpri-Chinchwad are quick and convenient.
Industrial Areas We Serve in and Around Pimpri-Chinchwad
Pressurization Zone in Pimpri-Chinchwad – Frequently Asked Questions
Are you a pressurization zone manufacturer in Pimpri-Chinchwad?
Yes. SEW Surface Coating Pvt. Ltd. manufactures pressurization zones at its own factory at Ranje, Kondhanpur Road, Pune, and has been doing so since 1996. We supply, erect and commission them for customers across Pimpri-Chinchwad and the rest of India.
What is a pressurization zone in a coating plant?
It is an enclosure built around the powder coating or paint booth. Filtered fresh air is supplied from a plenum so the room stays under positive pressure and dust stays out.
How many filter stages are used?
Atmospheric air is filtered in two or three stages, depending on the finish quality required.
Can it be added to an existing booth?
Yes. We can design a pressurization chamber around your existing powder coating booth or paint booth, subject to the space available.
Which parts benefit most?
High-gloss, appearance-critical parts such as appliance panels, auto parts and architectural sections, where dust specks cause rework.
Can I visit your factory before ordering?
Yes. Our works is in Pune district, so Pimpri-Chinchwad customers can visit us to discuss the layout and see equipment under fabrication. Call +91-99758 35066 to arrange a visit.
How do I get a quotation for a pressurization zone in Pimpri-Chinchwad?
Send your booth size, conveyor openings, available space and finish requirement through our enquiry page, or call +91-99758 35066. Our engineers will prepare a layout and technical offer.
Other Products We Supply in Pimpri-Chinchwad
- Pretreatment Plant in Pimpri-Chinchwad
- Water Drying Oven in Pimpri-Chinchwad
- Powder Coating Plant in Pimpri-Chinchwad
- Liquid Coating Plant in Pimpri-Chinchwad
- Varnish Plant in Pimpri-Chinchwad
- CED Coating Plant in Pimpri-Chinchwad
- Transporter System in Pimpri-Chinchwad
- Special Purpose Oven in Pimpri-Chinchwad
Pressurization Zones in Other Locations
- Pressurization Zone in Pune
- Pressurization Zone in Satara
- Pressurization Zone in Thane
- Pressurization Zone in Mumbai
- Pressurization Zone in Nashik
- Pressurization Zone in Aurangabad
- Pressurization Zone in Vapi
- Pressurization Zone in Kolhapur
Pressurization Zones – main product page | All locations we serve
Need a Pressurization Zone in Pimpri-Chinchwad?
Share your booth size, conveyor openings, available space and finish requirement. Our engineers will send a plant layout and technical offer for Pimpri-Chinchwad, and you are welcome to visit our Pune works.
Send Your Requirement Contact Us