Water Drying Oven in Pune, Maharashtra
SEW Surface Coating Pvt. Ltd. designs, manufactures and installs water drying ovens (WDO) for manufacturers in Pune. Our factory is right here in Pune district, at Ranje on Kondhanpur Road, so Pune buyers deal directly with the manufacturer, with no dealer in between.
After pretreatment, components must be completely dry before they enter the powder coating or painting booth. A water drying oven is an enclosed, insulated chamber with air-circulating blowers and a heating system that removes all moisture quickly and evenly. We build it to match your pretreatment plant, conveyor and production rate.
- In-Line, Batch & Conveyorised
- Camel Back for Low Heat Loss
- Matched to Pretreatment
- Factory in Pune
Water Drying Ovens for Pune's Manufacturing Industry
Pune is one of India's largest automotive and engineering centres. Vehicle and component plants are concentrated in Chakan, Bhosari, Pimpri-Chinchwad and Talegaon. Appliance and engineering units have grown in Ranjangaon, Sanaswadi and Shikrapur, and newer industrial belts are coming up along the Pune–Satara road at Shirwal and Khed Shivapur.
In Pune, demand for water drying ovens comes mainly from automotive and component makers, appliance and HVAC makers and electrical and panel makers. Water left in seams, holes and folds after the final rinse causes blistering, pin-holes and poor adhesion once the part is coated. A correctly sized drying oven removes that moisture completely, so every part reaches the coating booth dry and at a steady temperature.
For a Pune buyer, having the manufacturer in the same district is a practical advantage. You can visit our works at Ranje to see equipment under fabrication, our engineers can reach your site quickly for layout studies, and service support is close by after commissioning.
Types of Water Drying Ovens We Supply in Pune
In-Line With Dip Pretreatment
A tank-type oven placed in line with the dip pretreatment tanks. The same hoist or transporter that dips the basket loads it into the oven.
- Hoist or wagon puts the basket in and takes it out
- Tank type construction
- Pneumatic or hydraulic doors
Best for: Dip pretreatment plants with hoist or transporter.
Batch Type Water Drying Oven
After pretreatment, components are loaded on a trolley and the trolley is pushed into the oven to dry off the water.
Best for: Batch plants, large components and lower volumes.
Conveyorised Conventional WDO
The conveyor carries articles through the insulated chamber for a set time and brings them out continuously, dry and ready for coating.
Best for: Spray pretreatment lines feeding a conveyorised coating booth.
Conveyorised Camel Back WDO
Works like a conveyorised oven, but the article entry and exit are cut out parallel to the ground so hot air stays inside and heat loss is reduced.
Best for: Continuous lines where fuel saving matters.
Where the Water Drying Oven Fits in Your Line
The water drying oven sits between pretreatment and the coating booth:
- PretreatmentDegreasing, de-rusting, phosphating and rinses.
- DM Water RinseFinal rinse leaves a clean, salt-free surface.
- Water Drying OvenHot air circulation removes all moisture.
- Coating BoothDry parts move on to powder or liquid coating.
- Curing OvenThe coating is baked to its final finish.
Oven temperature, size and residence time are calculated from your component weight, conveyor speed and the fuel available at your site.
Equipment Supplied With the Water Drying Oven
Pretreatment Plant
Dip or spray pretreatment cleans and phosphates the metal surface so the coating adheres well and resists corrosion.
Transporter System
PLC-controlled transporter that moves jobs through the tanks on a programmed cycle, giving priority to critical tanks.
Powder Coating Booth
Electrostatic powder booth with mono-cyclone or multi-cyclone recovery and after filter unit.
Oil Skimmer
Continuously removes floating oil from the degreasing tank, so the chemical lasts longer and parts come out cleaner.
Sludge Separator
Separates phosphate sludge from the bath to keep the process stable and cut tank-cleaning downtime.
Air Agitator
Keeps the bath moving for even temperature and chemical concentration around every component.
Industries in Pune That Use Our Water Drying Ovens
Automotive & Auto Components
Chakan, Bhosari, Pimpri-Chinchwad and Talegaon form one of India's densest auto clusters, with hundreds of tier-1 and tier-2 suppliers.
Typical requirement: Conveyorised camel back WDO after spray pretreatment.
Home Appliances & HVAC
Appliance and HVAC makers in the Ranjangaon and Sanaswadi belt process cabinets, panels and sheet-metal parts at high volume.
Typical requirement: Conveyorised WDO matched to the coating line speed.
Electrical Panels & Switchgear
Panel builders and enclosure fabricators in Bhosari, Hadapsar and Pimpri need durable, consistent finishes.
Typical requirement: Conveyorised or batch WDO before the powder booth.
Steel Furniture & Storage
Office furniture, racking, lockers and storage system makers need an even, scratch-resistant finish on sheet metal.
Typical requirement: Conveyorised WDO for continuous sheet-metal parts.
Engineering & Fabrication
Machine builders and job fabricators across the city's MIDC estates process frames, guards and heavy structures.
Typical requirement: In-line WDO with dip pretreatment and transporter for heavy jobs.
Motors & Electrical Machines
Motor, alternator and electrical machine makers in the Pune belt need reliable insulation and finishing.
Typical requirement: Batch or in-line WDO sized to the pretreatment plant and output.
Water Drying Oven Specifications
| Oven types | In-line with dip pretreatment, batch type, conveyorised conventional, conveyorised camel back |
|---|---|
| Construction | Enclosed insulated chamber with air-circulating blowers |
| Doors | Pneumatic or hydraulic doors for in-line tank type ovens |
| Material handling | Hoist, wagon, transporter, trolley or overhead conveyor |
| Heating | Heating system selected to suit the fuel available at your site |
| Energy saving | Camel back design, Waste Heat Recovery System (WHRS) and solar-assisted heating |
| Controls | Temperature controllers; PLC and SCADA on request |
| Scope of supply | Design, manufacturing, erection and commissioning |
Final configuration is fixed after we study your component drawings, production rate and available floor space.
Built and Installed Within Pune
Our factory is at Ranje, on Kondhanpur Road in Pune district. Equipment for Pune customers is fabricated and pre-assembled there, delivered to your site by road, and erected and commissioned by our own team.
- Site visit and study of components, production rate and space
- Plant layout designed to fit minimum floor space
- Factory visit to see your plant under fabrication
- Delivery, erection and commissioning at your site
- Trial runs, operator guidance and after-sales service
Why Buyers in Pune Choose SEW Surface Coating
In-house manufacturing since 1996
Our own fabrication unit in Pune gives one-roof control over design, quality and delivery commitments.
25+ years in coating systems
More than two and a half decades of experience in powder and liquid painting systems for automobile, appliance, electrical, furniture and other industries.
Layouts in minimum space
We specialise in fitting a complete line into the floor space you actually have.
Low running cost
Plants are engineered for low fuel consumption, with options such as camel back ovens, solar-assisted heating and Waste Heat Recovery Systems (WHRS).
Modern technology
Nano-technology spray pretreatment, PLC-controlled transporters and SCADA monitoring are part of our installed base.
Quick local service
With our team based in Pune, site visits, trouble-shooting and spares support for Pune are quick and convenient.
Industrial Areas We Serve in and Around Pune
Water Drying Oven in Pune – Frequently Asked Questions
Are you a water drying oven manufacturer in Pune?
Yes. SEW Surface Coating Pvt. Ltd. manufactures water drying ovens at its own factory at Ranje, Kondhanpur Road, Pune, and has been doing so since 1996. We supply, erect and commission them for customers across Pune and the rest of India.
Why is a water drying oven needed after pretreatment?
Any water left on the component after the final rinse causes blistering, pin-holes and poor adhesion once it is coated. The water drying oven removes all moisture so parts enter the coating booth completely dry.
Which water drying oven suits a dip pretreatment plant?
An in-line, tank-type oven placed after the last dip tank is the usual choice, because the same hoist or transporter loads it. For trolley-based plants a batch type oven is used.
What is a camel back oven?
It is a conveyorised oven whose article entry and exit are cut out parallel to the ground, so hot air stays inside the chamber. This reduces heat loss and fuel consumption.
Can you supply the pretreatment plant with the oven?
Yes. We supply the complete pretreatment plant, water drying oven, coating booth and curing oven as one line.
Can I visit your factory before ordering?
Yes. Our works is in Pune district, so Pune customers can visit us to discuss the layout and see equipment under fabrication. Call +91-99758 35066 to arrange a visit.
How do I get a quotation for a water drying oven in Pune?
Send your component size and weight, pretreatment type, production rate and fuel available through our enquiry page, or call +91-99758 35066. Our engineers will prepare a layout and technical offer.
Other Products We Supply in Pune
Water Drying Ovens in Other Locations
- Water Drying Oven in Pimpri-Chinchwad
- Water Drying Oven in Satara
- Water Drying Oven in Mumbai
- Water Drying Oven in Thane
- Water Drying Oven in Nashik
- Water Drying Oven in Kolhapur
- Water Drying Oven in Aurangabad
- Water Drying Oven in Vapi
Water Drying Ovens – main product page | All locations we serve
Need a Water Drying Oven in Pune?
Share your component size and weight, pretreatment type, production rate and fuel available. Our engineers will send a plant layout and technical offer for Pune, and you are welcome to visit our Pune works.
Send Your Requirement Contact Us