Transporter System in Pune, Maharashtra
SEW Surface Coating Pvt. Ltd. designs, manufactures and installs PLC-controlled transporter systems for manufacturers in Pune. Our factory is right here in Pune district, at Ranje on Kondhanpur Road, so Pune buyers deal directly with the manufacturer, with no dealer in between.
A transporter is the main production equipment of a dip tank line. It loads and unloads jobs into the tanks on a programmed cycle, based on the time required in each tank, and sequences the critical tanks so jobs are removed from them with minimal delay.
- PLC Controlled
- Manual / Semi-Auto / Automatic
- Programmed Tank Cycle
- Factory in Pune
Transporter Systems for Pune's Manufacturing Industry
Pune is one of India's largest automotive and engineering centres. Vehicle and component plants are concentrated in Chakan, Bhosari, Pimpri-Chinchwad and Talegaon. Appliance and engineering units have grown in Ranjangaon, Sanaswadi and Shikrapur, and newer industrial belts are coming up along the Pune–Satara road at Shirwal and Khed Shivapur.
In Pune, demand for transporter systems comes mainly from automotive and component makers, appliance and HVAC makers and electrical and panel makers. In dip pretreatment, leaving a job too long in degrease, de-rust, zinc phosphate or the water drying oven damages it. A PLC transporter gives those critical tanks priority, holds each tank time accurately and keeps the line at its planned production rate.
For a Pune buyer, having the manufacturer in the same district is a practical advantage. You can visit our works at Ranje to see equipment under fabrication, our engineers can reach your site quickly for layout studies, and service support is close by after commissioning.
Transporter System Modes We Supply in Pune
Manual / Semi-Automatic / Automatic
The transporter lifts the basket or jig, travels over the tanks and dips it as per the process. It can be operated manually, semi-automatically or fully automatically.
- Programmed cycle based on tank timings
- Priority sequencing for critical tanks
- PLC control for the target production rate
Applications
Used on dip pretreatment plants, CED coating lines and other multi-tank chemical processes where jobs move between tanks on a timed cycle.
- Dip pretreatment plants
- CED coating plants
- In-line water drying ovens
How the Transporter Cycle Works
The PLC runs the cycle below and repeats it for every job:
- LoadJob is loaded in a basket or jig at the loading station.
- Lift & TravelTransporter lifts the job and travels to the next tank.
- DipJob is lowered into the tank for the set time.
- Priority PickupJobs in critical tanks are picked first to avoid damage.
- DryingJob is placed in the in-line water drying oven.
- UnloadFinished job returns to the unloading station.
Critical tanks such as degrease, de-rust, zinc phosphate and the WDO are treated on priority, so jobs are removed from them with minimal time loss.
Equipment Supplied With the Transporter System
Pretreatment Plant
Dip or spray pretreatment cleans and phosphates the metal surface so the coating adheres well and resists corrosion.
Water Drying Oven
Dries parts completely after the final rinse, since moisture left on the surface spoils the finish.
Oil Skimmer
Continuously removes floating oil from the degreasing tank, so the chemical lasts longer and parts come out cleaner.
Sludge Separator
Separates phosphate sludge from the bath to keep the process stable and cut tank-cleaning downtime.
Industries in Pune That Use Our Transporter Systems
Automotive & Auto Components
Chakan, Bhosari, Pimpri-Chinchwad and Talegaon form one of India's densest auto clusters, with hundreds of tier-1 and tier-2 suppliers.
Typical requirement: PLC transporter for dip pretreatment or batch CED of auto parts.
Home Appliances & HVAC
Appliance and HVAC makers in the Ranjangaon and Sanaswadi belt process cabinets, panels and sheet-metal parts at high volume.
Typical requirement: PLC transporter matched to tank layout, job weight and cycle time.
Electrical Panels & Switchgear
Panel builders and enclosure fabricators in Bhosari, Hadapsar and Pimpri need durable, consistent finishes.
Typical requirement: PLC transporter matched to tank layout, job weight and cycle time.
Steel Furniture & Storage
Office furniture, racking, lockers and storage system makers need an even, scratch-resistant finish on sheet metal.
Typical requirement: PLC transporter matched to tank layout, job weight and cycle time.
Engineering & Fabrication
Machine builders and job fabricators across the city's MIDC estates process frames, guards and heavy structures.
Typical requirement: Automatic transporter for heavy jobs on a dip pretreatment line.
Motors & Electrical Machines
Motor, alternator and electrical machine makers in the Pune belt need reliable insulation and finishing.
Typical requirement: PLC transporter matched to tank layout, job weight and cycle time.
Transporter System Specifications
| Control | PLC-controlled programmed cycle |
|---|---|
| Modes | Manual, semi-automatic and automatic |
| Cycle logic | Based on timings in each tank, with priority for critical tanks |
| Critical tanks | Degrease, de-rust, zinc phosphate and WDO |
| Applications | Dip pretreatment, CED coating and multi-tank chemical lines |
| Monitoring | SCADA on request |
| Scope of supply | Design, manufacturing, erection and commissioning |
Final configuration is fixed after we study your component drawings, production rate and available floor space.
Built and Installed Within Pune
Our factory is at Ranje, on Kondhanpur Road in Pune district. Equipment for Pune customers is fabricated and pre-assembled there, delivered to your site by road, and erected and commissioned by our own team.
- Site visit and study of components, production rate and space
- Plant layout designed to fit minimum floor space
- Factory visit to see your plant under fabrication
- Delivery, erection and commissioning at your site
- Trial runs, operator guidance and after-sales service
Why Buyers in Pune Choose SEW Surface Coating
In-house manufacturing since 1996
Our own fabrication unit in Pune gives one-roof control over design, quality and delivery commitments.
25+ years in coating systems
More than two and a half decades of experience in powder and liquid painting systems for automobile, appliance, electrical, furniture and other industries.
Layouts in minimum space
We specialise in fitting a complete line into the floor space you actually have.
Low running cost
Plants are engineered for low fuel consumption, with options such as camel back ovens, solar-assisted heating and Waste Heat Recovery Systems (WHRS).
Modern technology
Nano-technology spray pretreatment, PLC-controlled transporters and SCADA monitoring are part of our installed base.
Quick local service
With our team based in Pune, site visits, trouble-shooting and spares support for Pune are quick and convenient.
Industrial Areas We Serve in and Around Pune
Transporter System in Pune – Frequently Asked Questions
Are you a transporter system manufacturer in Pune?
Yes. SEW Surface Coating Pvt. Ltd. manufactures transporter systems at its own factory at Ranje, Kondhanpur Road, Pune, and has been doing so since 1996. We supply, erect and commission them for customers across Pune and the rest of India.
What does a transporter system do?
It loads and unloads jobs into the various tanks of a chemical process on a programmed cycle, based on the time required in each tank.
Why is priority sequencing important?
Leaving a job too long in critical tanks such as degrease, de-rust, zinc phosphate or the water drying oven can damage it. The transporter picks jobs from these tanks first so they are removed with minimal time loss.
Can the transporter be added to an existing dip plant?
Yes, subject to the tank layout and building structure. We study your existing pretreatment plant and propose a suitable transporter.
Is a manual mode available?
Yes. Transporters can run in manual, semi-automatic or automatic mode.
Can I visit your factory before ordering?
Yes. Our works is in Pune district, so Pune customers can visit us to discuss the layout and see equipment under fabrication. Call +91-99758 35066 to arrange a visit.
How do I get a quotation for a transporter system in Pune?
Send your tank layout, number of tanks, job weight and target cycle time through our enquiry page, or call +91-99758 35066. Our engineers will prepare a layout and technical offer.
Other Products We Supply in Pune
Transporter Systems in Other Locations
- Transporter System in Pimpri-Chinchwad
- Transporter System in Satara
- Transporter System in Mumbai
- Transporter System in Thane
- Transporter System in Nashik
- Transporter System in Kolhapur
- Transporter System in Aurangabad
- Transporter System in Vapi
Transporter Systems – main product page | All locations we serve
Need a Transporter System in Pune?
Share your tank layout, number of tanks, job weight and target cycle time. Our engineers will send a plant layout and technical offer for Pune, and you are welcome to visit our Pune works.
Send Your Requirement Contact Us