Special Purpose Oven in Ghana
SEW Surface Coating Pvt. Ltd. designs and manufactures special purpose industrial ovens up to 800°C for manufacturers in Ghana. Every plant is built at our own works in Pune, India, then export-packed and shipped to Ghana, with erection and commissioning support from our engineers.
Beyond coating lines, we build ovens for heat processes such as baking after flux, bonding, stress relieving and annealing. Each oven is designed around your component, temperature cycle and loading method, whether batch or conveyorised.
- Up to 800°C
- Batch & Conveyorised
- Custom Built
- Exported to Ghana
Special Purpose Ovens for Ghana's Industry
Ghana's manufacturing centres are Tema Industrial Area, Accra, Kumasi and Takoradi, with new capacity at the Dawa Industrial Zone. Steel, roofing, furniture, electrical and agro-processing equipment makers are growing.
In Ghana, demand for special purpose ovens comes mainly from steel structure fabricators, furniture and storage makers and electrical and panel makers. Heat processes need accurate temperature, even air circulation and a loading method that suits the part. A purpose-built oven gives repeatable results and lower energy use than an off-the-shelf unit.
Local fabricators are adding coating capacity to replace imported finished products.
Special Purpose Ovens We Supply in Ghana
Baking Oven After Flux
Ovens for baking components after fluxing, with trolley or conveyor loading to suit your process.
Best for: Brazing and soldering lines.
Bonding Oven
Controlled-temperature ovens for bonding processes, available as batch or continuous conveyor ovens.
Best for: Rubber-to-metal, adhesive and friction material bonding.
Stress Relieving Oven
Ovens that heat fabricated or machined components to relieve residual stress before machining or service.
Best for: Welded fabrications and machined parts.
Annealing Oven
High-temperature ovens up to 800°C for annealing, designed to the material and cycle.
Best for: Metal parts that need softening or grain refinement.
How We Design a Special Purpose Oven
Every special purpose oven is engineered to the job:
- Process StudyTemperature, cycle time and component details.
- Heating DesignHeating system and air circulation for even temperature.
- Loading MethodTrolley, rail bogie, mesh belt or overhead conveyor.
- FabricationBuilt and tested at our Pune works.
- CommissioningInstalled and proven at your site.
Temperature range, chamber size and controls are fixed after we study your process.
Other Ovens We Manufacture
Water Drying Oven
Dries parts completely after the final rinse, since moisture left on the surface spoils the finish.
Powder & Paint Curing Ovens
Batch type, conveyorised conventional or camel back ovens with air-circulating blowers for even temperature.
Industries in Ghana That Use Our Special Purpose Ovens
Steel & Roofing
Steel and roofing makers supply construction.
Typical requirement: Custom oven designed to the process temperature and cycle.
Steel Furniture
Furniture makers serve institutions and offices.
Typical requirement: Custom oven designed to the process temperature and cycle.
Electrical & Panels
Electrical makers supply power and buildings.
Typical requirement: Baking and curing ovens for electrical components.
Agro-Processing Equipment
Equipment makers serve cocoa and agro-processing.
Typical requirement: Custom oven designed to the process temperature and cycle.
Oil & Gas Equipment
Fabricators in Takoradi serve the offshore sector.
Typical requirement: Custom oven designed to the process temperature and cycle.
Special Purpose Oven Specifications
| Temperature | Up to 800°C |
|---|---|
| Processes | Baking after flux, bonding, stress relieving, annealing |
| Types | Batch and continuous (conveyorised / mesh belt) |
| Loading | Trolley, rail bogie, mesh belt or overhead conveyor |
| Air circulation | Blowers for even temperature across the chamber |
| Controls | Temperature controllers; PLC on request |
| Scope of supply | Design, manufacturing, erection and commissioning |
Final configuration is fixed after we study your component drawings, production rate and available floor space.
From Our Pune Works to Ghana
Plants for Ghana are fabricated and pre-assembled at our factory in Ranje, Pune, India. They are export-packed and shipped from Nhava Sheva (JNPT) port near Mumbai to Tema, and our engineers can travel to supervise erection and commissioning at your site.
- Technical study from your drawings, component details and production data
- Plant layout and process design in minimum floor space
- Fabrication and inspection at our Pune works
- Export packing and shipping documentation
- Erection and commissioning supervision by our engineers
Why Buyers in Ghana Choose SEW Surface Coating
In-house manufacturing since 1996
Our own fabrication unit in Pune gives one-roof control over design, quality and delivery commitments.
25+ years in coating systems
More than two and a half decades of experience in powder and liquid painting systems for automobile, appliance, electrical, furniture and other industries.
Layouts in minimum space
We specialise in fitting a complete line into the floor space you actually have.
Low running cost
Plants are engineered for low fuel consumption, with options such as camel back ovens, solar-assisted heating and Waste Heat Recovery Systems (WHRS).
Modern technology
Nano-technology spray pretreatment, PLC-controlled transporters and SCADA monitoring are part of our installed base.
Export experience
We handle export packing and documentation and support erection and commissioning for customers in Ghana.
Industrial Areas We Serve in Ghana
Special Purpose Oven in Ghana – Frequently Asked Questions
Do you export special purpose ovens to Ghana?
Yes. SEW Surface Coating Pvt. Ltd. manufactures special purpose ovens at its factory in Pune, India, and exports them to customers in Ghana, with erection and commissioning support from our engineers.
What temperature can your special purpose ovens reach?
We manufacture special purpose ovens for processes up to 800°C.
Which processes do these ovens handle?
Baking after flux, bonding, stress relieving and annealing, along with other custom heat processes.
Can the oven be conveyorised?
Yes. Depending on the process, we build batch ovens with trolleys or rail bogies, or continuous ovens with mesh belt or overhead conveyors.
Do you also make coating ovens?
Yes. We manufacture water drying ovens, powder and paint curing ovens, and varnish curing ovens.
How is the plant shipped to Ghana?
The plant is fabricated at our Pune works, export-packed and shipped from Nhava Sheva (JNPT) port near Mumbai to Tema. Our engineers can travel to supervise erection and commissioning.
How do I get a quotation for a special purpose oven in Ghana?
Send your process type, temperature, component size and weight, and batch or hourly output through our enquiry page, or call +91-99758 35066. Our engineers will prepare a layout and technical offer.
Other Products We Supply in Ghana
Special Purpose Ovens in Other Countries
- Special Purpose Oven in Nigeria
- Special Purpose Oven in Uganda
- Special Purpose Oven in Kenya
- Special Purpose Oven in Egypt
- Special Purpose Oven in Ethiopia
- Special Purpose Oven in Tanzania
- Special Purpose Oven in South Africa
- Special Purpose Oven in Saudi Arabia
Special Purpose Ovens – main product page | All locations we serve
Need a Special Purpose Oven in Ghana?
Share your process type, temperature, component size and weight, and batch or hourly output. Our engineers will send a plant layout and technical offer for Ghana.
Send Your Requirement Contact Us