Pressurization Zone in Ghana
SEW Surface Coating Pvt. Ltd. designs, manufactures and installs pressurization zones (pressurization chambers) for manufacturers in Ghana. Every plant is built at our own works in Pune, India, then export-packed and shipped to Ghana, with erection and commissioning support from our engineers.
A pressurization chamber is built around the powder coating booth or paint booth to keep dust off the components. Atmospheric fresh air is drawn in, filtered in two or three stages and delivered from a plenum chamber around the booth area, so the room stays under positive pressure.
- 2 or 3-Stage Filtration
- Powder & Paint Booths
- Dust-Free Finish
- Exported to Ghana
Pressurization Zones for Ghana's Industry
Ghana's manufacturing centres are Tema Industrial Area, Accra, Kumasi and Takoradi, with new capacity at the Dawa Industrial Zone. Steel, roofing, furniture, electrical and agro-processing equipment makers are growing.
In Ghana, demand for pressurization zones comes mainly from steel structure fabricators, furniture and storage makers and electrical and panel makers. Dust settling on wet paint or uncured powder shows up as specks and craters, and those parts have to be reworked. Keeping the booth area under filtered positive pressure stops outside dust from getting in, which matters most for high-gloss and appearance-critical parts.
Local fabricators are adding coating capacity to replace imported finished products.
Pressurization Zones We Supply in Ghana
Pressurization Chamber for Powder Booths
An enclosed, panelled room around the powder booth with filtered fresh air supplied from a plenum.
Best for: Powder coating lines with appearance-critical parts.
Pressurization Chamber for Paint Booths
The same filtered-air enclosure built around liquid painting booths to keep dust off wet paint.
Best for: Liquid painting lines for high-gloss finishes.
How a Pressurization Zone Works
- Fresh Air IntakeAtmospheric air is drawn in by the supply fan.
- Stage 1 FilterCoarse filtration removes larger dust.
- Stage 2 / 3 FilterFiner filtration cleans the air further.
- Plenum ChamberFiltered air is delivered evenly around the booth.
- Positive PressureRoom pressure keeps outside dust from entering.
Air volume, filter stages and room size are designed around your booth size and conveyor openings.
Equipment Supplied With the Pressurization Zone
Powder Coating Booth
Electrostatic powder booth with mono-cyclone or multi-cyclone recovery and after filter unit.
Liquid Painting Booth
Dry booths, side draft and downdraft water-wall booths, and dip painting tanks with paint curing ovens.
Curing Oven
Batch type, conveyorised conventional or camel back ovens with air-circulating blowers for even temperature.
Pretreatment Plant
Dip or spray pretreatment cleans and phosphates the metal surface so the coating adheres well and resists corrosion.
Industries in Ghana That Use Our Pressurization Zones
Steel & Roofing
Steel and roofing makers supply construction.
Typical requirement: Pressurization zone sized to the booth and conveyor openings.
Steel Furniture
Furniture makers serve institutions and offices.
Typical requirement: Pressurized booth room for furniture with appearance-critical finishes.
Electrical & Panels
Electrical makers supply power and buildings.
Typical requirement: Pressurized booth room for enclosures with high-gloss finishes.
Agro-Processing Equipment
Equipment makers serve cocoa and agro-processing.
Typical requirement: Pressurization zone sized to the booth and conveyor openings.
Oil & Gas Equipment
Fabricators in Takoradi serve the offshore sector.
Typical requirement: Pressurization zone sized to the booth and conveyor openings.
Pressurization Zone Specifications
| Application | Around powder coating booths and paint booths |
|---|---|
| Filtration | Fresh air filtered in two or three stages |
| Air delivery | Plenum chamber around the booth area |
| Construction | Panelled enclosure with doors and conveyor openings |
| Benefit | Dust-free coating and fewer rejections |
| Scope of supply | Design, manufacturing, erection and commissioning |
Final configuration is fixed after we study your component drawings, production rate and available floor space.
From Our Pune Works to Ghana
Plants for Ghana are fabricated and pre-assembled at our factory in Ranje, Pune, India. They are export-packed and shipped from Nhava Sheva (JNPT) port near Mumbai to Tema, and our engineers can travel to supervise erection and commissioning at your site.
- Technical study from your drawings, component details and production data
- Plant layout and process design in minimum floor space
- Fabrication and inspection at our Pune works
- Export packing and shipping documentation
- Erection and commissioning supervision by our engineers
Why Buyers in Ghana Choose SEW Surface Coating
In-house manufacturing since 1996
Our own fabrication unit in Pune gives one-roof control over design, quality and delivery commitments.
25+ years in coating systems
More than two and a half decades of experience in powder and liquid painting systems for automobile, appliance, electrical, furniture and other industries.
Layouts in minimum space
We specialise in fitting a complete line into the floor space you actually have.
Low running cost
Plants are engineered for low fuel consumption, with options such as camel back ovens, solar-assisted heating and Waste Heat Recovery Systems (WHRS).
Modern technology
Nano-technology spray pretreatment, PLC-controlled transporters and SCADA monitoring are part of our installed base.
Export experience
We handle export packing and documentation and support erection and commissioning for customers in Ghana.
Industrial Areas We Serve in Ghana
Pressurization Zone in Ghana – Frequently Asked Questions
Do you export pressurization zones to Ghana?
Yes. SEW Surface Coating Pvt. Ltd. manufactures pressurization zones at its factory in Pune, India, and exports them to customers in Ghana, with erection and commissioning support from our engineers.
What is a pressurization zone in a coating plant?
It is an enclosure built around the powder coating or paint booth. Filtered fresh air is supplied from a plenum so the room stays under positive pressure and dust stays out.
How many filter stages are used?
Atmospheric air is filtered in two or three stages, depending on the finish quality required.
Can it be added to an existing booth?
Yes. We can design a pressurization chamber around your existing powder coating booth or paint booth, subject to the space available.
Which parts benefit most?
High-gloss, appearance-critical parts such as appliance panels, auto parts and architectural sections, where dust specks cause rework.
How is the plant shipped to Ghana?
The plant is fabricated at our Pune works, export-packed and shipped from Nhava Sheva (JNPT) port near Mumbai to Tema. Our engineers can travel to supervise erection and commissioning.
How do I get a quotation for a pressurization zone in Ghana?
Send your booth size, conveyor openings, available space and finish requirement through our enquiry page, or call +91-99758 35066. Our engineers will prepare a layout and technical offer.
Other Products We Supply in Ghana
Pressurization Zones in Other Countries
- Pressurization Zone in Nigeria
- Pressurization Zone in Uganda
- Pressurization Zone in Kenya
- Pressurization Zone in Egypt
- Pressurization Zone in Ethiopia
- Pressurization Zone in Tanzania
- Pressurization Zone in South Africa
- Pressurization Zone in Saudi Arabia
Pressurization Zones – main product page | All locations we serve
Need a Pressurization Zone in Ghana?
Share your booth size, conveyor openings, available space and finish requirement. Our engineers will send a plant layout and technical offer for Ghana.
Send Your Requirement Contact Us