Liquid Coating Plant in Ethiopia
SEW Surface Coating Pvt. Ltd. designs, manufactures and installs liquid coating (painting) plants for manufacturers in Ethiopia. Every plant is built at our own works in Pune, India, then export-packed and shipped to Ethiopia, with erection and commissioning support from our engineers.
A liquid coating plant applies wet paint by spraying or dipping and then cures it in an oven. We build dry booths, side draft and downdraft water-wall booths, dip painting tanks and paint curing ovens with solvent exhaust, along with the pretreatment and conveyor the line needs.
- Dry & Water Wall Booths
- Dip Painting Tanks
- Paint Curing Ovens
- Exported to Ethiopia
Liquid Coating Plants for Ethiopia's Industry
Ethiopia has invested heavily in industrial parks such as Bole Lemi, Hawassa, Eastern Industrial Zone at Dukem, Kombolcha, Mekelle and Adama. Steel, furniture, electrical, metal-working and agro-processing equipment makers are growing around Addis Ababa.
In Ethiopia, demand for liquid coating plants comes mainly from steel structure fabricators, furniture and storage makers and electrical and panel makers. Liquid paint is still the right choice for heavy fabrications, large structures, special colours and parts that cannot take the cure temperature of powder. A well-designed booth captures overspray safely, keeps the painter's area clean and gives an even finish.
Infrastructure and housing projects keep demand high for coated steel products.
Types of Liquid Painting Booths We Supply in Ethiopia
Dip Painting Tank
The conveyor carries the article through the paint tank for the required time. The article is coated and then cured in the paint curing oven.
Best for: Simple-shaped parts in high volume where a uniform primer or single coat is needed.
Side Draft Water Wall Booth
An MS/SS panel enclosure with a constant-flow water wall behind the article. Overspray paint flows down with the water into the washing chamber while air is drawn from the side. The operator stands outside the booth.
Best for: Conveyorised and batch type plants.
Downdraft Water Wall Booth
Air is drawn from the top to the bottom of the booth, with a constant-flow water wall at the floor. Overspray flows with the water into the washing chamber. The operator walks inside the booth around the article.
Best for: Heavy articles and large fabrications.
Dry Booth
Recommended where the painting workload is low or the components are very small. It uses mechanical filters, which can be cleaned and reused, or replaceable paper filters.
Best for: Low volumes, small parts and medium articles on an overhead conveyor.
Paint Curing Ovens
The paint curing oven is an enclosed, insulated chamber with air-circulating blowers and a heating system. A solvent evaporation exhaust system maintains the solvent LEL level for safe operation.
Batch Type Oven
Painted articles are loaded on a trolley and pushed inside. After the baking schedule, the doors are opened and the trolley is taken out.
Best for: Mixed jobs and heavy fabrications.
Conveyorised Conventional Oven
The conveyor carries articles through the chamber for the required time, so parts come out cured continuously.
Best for: Continuous painting lines.
Conveyorised Camel Back Oven
Entry and exit are cut out parallel to the ground so hot air stays inside and heat loss is reduced.
Best for: Lines where fuel saving is a priority.
Equipment Supplied With the Liquid Coating Plant
Pretreatment Plant
Dip or spray pretreatment cleans and phosphates the metal surface so the coating adheres well and resists corrosion.
Water Drying Oven
Dries parts completely after the final rinse, since moisture left on the surface spoils the finish.
Pressurization Zone
Fresh air filtered in two or three stages is delivered around the booth to keep dust off the components.
Transporter System
PLC-controlled transporter that moves jobs through the tanks on a programmed cycle, giving priority to critical tanks.
Industries in Ethiopia That Use Our Liquid Coating Plants
Steel & Structures
Steel fabricators supply infrastructure and housing.
Typical requirement: Large downdraft booth for long structural members.
Steel Furniture
Furniture makers serve offices and institutions.
Typical requirement: Spray booth and paint curing oven matched to part size and output.
Electrical
Electrical makers supply power projects.
Typical requirement: Spray booth and paint curing oven matched to part size and output.
Agricultural Equipment
Implement makers serve the large farm economy.
Typical requirement: Downdraft or side draft booth with batch oven for implements and tractor parts.
Metal Working
Metal-working units process fabricated parts.
Typical requirement: Downdraft water wall booth with batch oven for heavy fabrications.
Liquid Coating Plant Specifications
| Booth types | Dry booth, side draft water wall, downdraft water wall |
|---|---|
| Dip painting | Conveyorised dip painting tank |
| Construction | MS / SS panel enclosure |
| Overspray control | Constant-flow water wall or mechanical / paper filters |
| Curing ovens | Batch type, conveyorised conventional and conveyorised camel back |
| Safety | Solvent evaporation exhaust system to maintain LEL level |
| Material handling | Trolley, overhead conveyor or transporter |
| Clean-room option | Pressurization zone with two or three-stage filtered air |
| Scope of supply | Design, manufacturing, erection and commissioning |
Final configuration is fixed after we study your component drawings, production rate and available floor space.
From Our Pune Works to Ethiopia
Plants for Ethiopia are fabricated and pre-assembled at our factory in Ranje, Pune, India. They are export-packed and shipped from Nhava Sheva (JNPT) port near Mumbai to Djibouti (then by road to Ethiopia), and our engineers can travel to supervise erection and commissioning at your site.
- Technical study from your drawings, component details and production data
- Plant layout and process design in minimum floor space
- Fabrication and inspection at our Pune works
- Export packing and shipping documentation
- Erection and commissioning supervision by our engineers
Why Buyers in Ethiopia Choose SEW Surface Coating
In-house manufacturing since 1996
Our own fabrication unit in Pune gives one-roof control over design, quality and delivery commitments.
25+ years in coating systems
More than two and a half decades of experience in powder and liquid painting systems for automobile, appliance, electrical, furniture and other industries.
Layouts in minimum space
We specialise in fitting a complete line into the floor space you actually have.
Low running cost
Plants are engineered for low fuel consumption, with options such as camel back ovens, solar-assisted heating and Waste Heat Recovery Systems (WHRS).
Modern technology
Nano-technology spray pretreatment, PLC-controlled transporters and SCADA monitoring are part of our installed base.
Export experience
We handle export packing and documentation and support erection and commissioning for customers in Ethiopia.
Industrial Areas We Serve in Ethiopia
Liquid Coating Plant in Ethiopia – Frequently Asked Questions
Do you export liquid coating plants to Ethiopia?
Yes. SEW Surface Coating Pvt. Ltd. manufactures liquid coating plants at its factory in Pune, India, and exports them to customers in Ethiopia, with erection and commissioning support from our engineers.
Which painting booth should I choose?
A dry booth suits low volumes and small parts. A side draft water wall booth suits conveyorised and batch plants where the operator stands outside. A downdraft water wall booth suits heavy articles, with the operator walking around the part inside the booth.
How does a water wall booth work?
A constant flow of water runs down the wall behind the article. Overspray paint is drawn into the water and carried to the washing chamber, keeping the booth and exhaust clean.
Why does a paint curing oven need solvent exhaust?
Liquid paints release solvent vapour while curing. The exhaust system keeps solvent concentration below the lower explosive limit (LEL) for safe operation.
Can you supply pretreatment with the painting plant?
Yes. We supply the pretreatment plant, water drying oven, painting booth, curing oven and conveyor as a complete line.
How is the plant shipped to Ethiopia?
The plant is fabricated at our Pune works, export-packed and shipped from Nhava Sheva (JNPT) port near Mumbai to Djibouti (then by road to Ethiopia). Our engineers can travel to supervise erection and commissioning.
How do I get a quotation for a liquid coating plant in Ethiopia?
Send your component size and weight, paint type, production rate and available space through our enquiry page, or call +91-99758 35066. Our engineers will prepare a layout and technical offer.
Other Products We Supply in Ethiopia
Liquid Coating Plants in Other Countries
- Liquid Coating Plant in Kenya
- Liquid Coating Plant in Uganda
- Liquid Coating Plant in Tanzania
- Liquid Coating Plant in Saudi Arabia
- Liquid Coating Plant in Qatar
- Liquid Coating Plant in Bahrain
- Liquid Coating Plant in Kuwait
- Liquid Coating Plant in Egypt
Liquid Coating Plants – main product page | All locations we serve
Need a Liquid Coating Plant in Ethiopia?
Share your component size and weight, paint type, production rate and available space. Our engineers will send a plant layout and technical offer for Ethiopia.
Send Your Requirement Contact Us