Transporter System in Rajkot, Gujarat
SEW Surface Coating Pvt. Ltd. designs, manufactures and installs PLC-controlled transporter systems for manufacturers in Rajkot, Gujarat. Every plant is built at our own works in Pune, Maharashtra, then erected and commissioned at your site in Rajkot.
A transporter is the main production equipment of a dip tank line. It loads and unloads jobs into the tanks on a programmed cycle, based on the time required in each tank, and sequences the critical tanks so jobs are removed from them with minimal delay.
- PLC Controlled
- Manual / Semi-Auto / Automatic
- Programmed Tank Cycle
- Supplied across Rajkot
Transporter Systems for Rajkot's Manufacturing Industry
Rajkot is Saurashtra's engineering capital, known for diesel engines, pumps, auto parts, castings and machine tools. Thousands of small and medium units work out of Aji, Metoda, Shapar-Veraval and Lodhika GIDCs.
In Rajkot, demand for transporter systems comes mainly from pump and motor makers, automotive and component makers and engineering and fabrication units. In dip pretreatment, leaving a job too long in degrease, de-rust, zinc phosphate or the water drying oven damages it. A PLC transporter gives those critical tanks priority, holds each tank time accurately and keeps the line at its planned production rate.
Much of the region's output is exported, so manufacturers are investing in better pretreatment and coating to meet buyer standards. Rajkot is about 880 km from our Pune works by road.
Transporter System Modes We Supply in Rajkot
Manual / Semi-Automatic / Automatic
The transporter lifts the basket or jig, travels over the tanks and dips it as per the process. It can be operated manually, semi-automatically or fully automatically.
- Programmed cycle based on tank timings
- Priority sequencing for critical tanks
- PLC control for the target production rate
Applications
Used on dip pretreatment plants, CED coating lines and other multi-tank chemical processes where jobs move between tanks on a timed cycle.
- Dip pretreatment plants
- CED coating plants
- In-line water drying ovens
How the Transporter Cycle Works
The PLC runs the cycle below and repeats it for every job:
- LoadJob is loaded in a basket or jig at the loading station.
- Lift & TravelTransporter lifts the job and travels to the next tank.
- DipJob is lowered into the tank for the set time.
- Priority PickupJobs in critical tanks are picked first to avoid damage.
- DryingJob is placed in the in-line water drying oven.
- UnloadFinished job returns to the unloading station.
Critical tanks such as degrease, de-rust, zinc phosphate and the WDO are treated on priority, so jobs are removed from them with minimal time loss.
Equipment Supplied With the Transporter System
Pretreatment Plant
Dip or spray pretreatment cleans and phosphates the metal surface so the coating adheres well and resists corrosion.
Water Drying Oven
Dries parts completely after the final rinse, since moisture left on the surface spoils the finish.
Oil Skimmer
Continuously removes floating oil from the degreasing tank, so the chemical lasts longer and parts come out cleaner.
Sludge Separator
Separates phosphate sludge from the bath to keep the process stable and cut tank-cleaning downtime.
Industries in Rajkot That Use Our Transporter Systems
Pumps, Engines & Motors
Rajkot is one of India's largest centres for submersible pumps, diesel engines and motors.
Typical requirement: PLC transporter matched to tank layout, job weight and cycle time.
Auto Parts
Auto part makers supply OEMs and the replacement market across India and abroad.
Typical requirement: PLC transporter for dip pretreatment or batch CED of auto parts.
Machine Tools & Engineering
Machine tool and engineering units process frames, beds and guards.
Typical requirement: Automatic transporter for heavy jobs on a dip pretreatment line.
Agricultural Equipment
Implement and farm-equipment makers serve Saurashtra and beyond.
Typical requirement: Transporter for dipping heavy implement and tractor parts.
Motor Windings
Pump and motor makers need varnishing of stator windings.
Typical requirement: PLC transporter matched to tank layout, job weight and cycle time.
Transporter System Specifications
| Control | PLC-controlled programmed cycle |
|---|---|
| Modes | Manual, semi-automatic and automatic |
| Cycle logic | Based on timings in each tank, with priority for critical tanks |
| Critical tanks | Degrease, de-rust, zinc phosphate and WDO |
| Applications | Dip pretreatment, CED coating and multi-tank chemical lines |
| Monitoring | SCADA on request |
| Scope of supply | Design, manufacturing, erection and commissioning |
Final configuration is fixed after we study your component drawings, production rate and available floor space.
From Our Pune Works to Rajkot
Plants for Rajkot are fabricated and pre-assembled at our factory in Ranje, Pune, about 880 km away by road. Equipment is dispatched by road and erected at your site by our team, followed by commissioning and trial runs.
- Site visit and study of components, production rate and space
- Plant layout and process design in minimum floor space
- Fabrication and assembly at our Pune factory
- Dispatch, erection and commissioning at your site
- Trial runs and after-sales service support
Why Buyers in Rajkot Choose SEW Surface Coating
In-house manufacturing since 1996
Our own fabrication unit in Pune gives one-roof control over design, quality and delivery commitments.
25+ years in coating systems
More than two and a half decades of experience in powder and liquid painting systems for automobile, appliance, electrical, furniture and other industries.
Layouts in minimum space
We specialise in fitting a complete line into the floor space you actually have.
Low running cost
Plants are engineered for low fuel consumption, with options such as camel back ovens, solar-assisted heating and Waste Heat Recovery Systems (WHRS).
Modern technology
Nano-technology spray pretreatment, PLC-controlled transporters and SCADA monitoring are part of our installed base.
Erection to after-sales
We stay with the project from plant purchase through erection, commissioning and service support.
Industrial Areas We Serve in and Around Rajkot
Transporter System in Rajkot – Frequently Asked Questions
Do you supply transporter systems in Rajkot?
Yes. SEW Surface Coating Pvt. Ltd. manufactures transporter systems at its factory in Pune and supplies, erects and commissions them for customers across Rajkot, Gujarat.
What does a transporter system do?
It loads and unloads jobs into the various tanks of a chemical process on a programmed cycle, based on the time required in each tank.
Why is priority sequencing important?
Leaving a job too long in critical tanks such as degrease, de-rust, zinc phosphate or the water drying oven can damage it. The transporter picks jobs from these tanks first so they are removed with minimal time loss.
Can the transporter be added to an existing dip plant?
Yes, subject to the tank layout and building structure. We study your existing pretreatment plant and propose a suitable transporter.
Is a manual mode available?
Yes. Transporters can run in manual, semi-automatic or automatic mode.
How is the plant delivered and installed in Rajkot?
The plant is fabricated at our Pune works, about 880 km from Rajkot by road. It is dispatched to your site, where our team erects and commissions it and carries out trial runs.
How do I get a quotation for a transporter system in Rajkot?
Send your tank layout, number of tanks, job weight and target cycle time through our enquiry page, or call +91-99758 35066. Our engineers will prepare a layout and technical offer.
Other Products We Supply in Rajkot
Transporter Systems in Other Locations
- Transporter System in Ahmedabad
- Transporter System in Surat
- Transporter System in Vadodara
- Transporter System in Vapi
- Transporter System in Nashik
- Transporter System in Thane
- Transporter System in Mumbai
- Transporter System in Pimpri-Chinchwad
Transporter Systems – main product page | All locations we serve
Need a Transporter System in Rajkot?
Share your tank layout, number of tanks, job weight and target cycle time. Our engineers will send a plant layout and technical offer for Rajkot.
Send Your Requirement Contact Us