Special Purpose Oven in Indonesia
SEW Surface Coating Pvt. Ltd. designs and manufactures special purpose industrial ovens up to 800°C for manufacturers in Indonesia. Every plant is built at our own works in Pune, India, then export-packed and shipped to Indonesia, with erection and commissioning support from our engineers.
Beyond coating lines, we build ovens for heat processes such as baking after flux, bonding, stress relieving and annealing. Each oven is designed around your component, temperature cycle and loading method, whether batch or conveyorised.
- Up to 800°C
- Batch & Conveyorised
- Custom Built
- Exported to Indonesia
Special Purpose Ovens for Indonesia's Industry
Indonesia's manufacturing is concentrated in the Jakarta region, especially Cikarang, Karawang and Tangerang, with further hubs in Batam, Surabaya, Semarang and Medan. Automotive, motorcycle, appliance, furniture and steel makers dominate.
In Indonesia, demand for special purpose ovens comes mainly from automotive and component makers, appliance and HVAC makers and furniture and storage makers. Heat processes need accurate temperature, even air circulation and a loading method that suits the part. A purpose-built oven gives repeatable results and lower energy use than an off-the-shelf unit.
Automotive and motorcycle suppliers run high-volume pretreatment and coating to OEM standards.
Special Purpose Ovens We Supply in Indonesia
Baking Oven After Flux
Ovens for baking components after fluxing, with trolley or conveyor loading to suit your process.
Best for: Brazing and soldering lines.
Bonding Oven
Controlled-temperature ovens for bonding processes, available as batch or continuous conveyor ovens.
Best for: Rubber-to-metal, adhesive and friction material bonding.
Stress Relieving Oven
Ovens that heat fabricated or machined components to relieve residual stress before machining or service.
Best for: Welded fabrications and machined parts.
Annealing Oven
High-temperature ovens up to 800°C for annealing, designed to the material and cycle.
Best for: Metal parts that need softening or grain refinement.
How We Design a Special Purpose Oven
Every special purpose oven is engineered to the job:
- Process StudyTemperature, cycle time and component details.
- Heating DesignHeating system and air circulation for even temperature.
- Loading MethodTrolley, rail bogie, mesh belt or overhead conveyor.
- FabricationBuilt and tested at our Pune works.
- CommissioningInstalled and proven at your site.
Temperature range, chamber size and controls are fixed after we study your process.
Other Ovens We Manufacture
Water Drying Oven
Dries parts completely after the final rinse, since moisture left on the surface spoils the finish.
Powder & Paint Curing Ovens
Batch type, conveyorised conventional or camel back ovens with air-circulating blowers for even temperature.
Industries in Indonesia That Use Our Special Purpose Ovens
Automotive & Motorcycles
Cikarang and Karawang host car and motorcycle plants and suppliers.
Typical requirement: Bonding and stress relieving ovens for auto components.
Appliances
Appliance makers process sheet-metal parts at volume.
Typical requirement: Flux baking ovens for brazed heat-exchanger and HVAC parts.
Metal Furniture
Furniture makers serve domestic and export markets.
Typical requirement: Custom oven designed to the process temperature and cycle.
Steel Structures
Steel fabricators supply construction.
Typical requirement: Custom oven designed to the process temperature and cycle.
Electrical & Panels
Electrical makers supply power and buildings.
Typical requirement: Baking and curing ovens for electrical components.
Special Purpose Oven Specifications
| Temperature | Up to 800°C |
|---|---|
| Processes | Baking after flux, bonding, stress relieving, annealing |
| Types | Batch and continuous (conveyorised / mesh belt) |
| Loading | Trolley, rail bogie, mesh belt or overhead conveyor |
| Air circulation | Blowers for even temperature across the chamber |
| Controls | Temperature controllers; PLC on request |
| Scope of supply | Design, manufacturing, erection and commissioning |
Final configuration is fixed after we study your component drawings, production rate and available floor space.
From Our Pune Works to Indonesia
Plants for Indonesia are fabricated and pre-assembled at our factory in Ranje, Pune, India. They are export-packed and shipped from Nhava Sheva (JNPT) port near Mumbai to Jakarta (Tanjung Priok), and our engineers can travel to supervise erection and commissioning at your site.
- Technical study from your drawings, component details and production data
- Plant layout and process design in minimum floor space
- Fabrication and inspection at our Pune works
- Export packing and shipping documentation
- Erection and commissioning supervision by our engineers
Why Buyers in Indonesia Choose SEW Surface Coating
In-house manufacturing since 1996
Our own fabrication unit in Pune gives one-roof control over design, quality and delivery commitments.
25+ years in coating systems
More than two and a half decades of experience in powder and liquid painting systems for automobile, appliance, electrical, furniture and other industries.
Layouts in minimum space
We specialise in fitting a complete line into the floor space you actually have.
Low running cost
Plants are engineered for low fuel consumption, with options such as camel back ovens, solar-assisted heating and Waste Heat Recovery Systems (WHRS).
Modern technology
Nano-technology spray pretreatment, PLC-controlled transporters and SCADA monitoring are part of our installed base.
Export experience
We handle export packing and documentation and support erection and commissioning for customers in Indonesia.
Industrial Areas We Serve in Indonesia
Special Purpose Oven in Indonesia – Frequently Asked Questions
Do you export special purpose ovens to Indonesia?
Yes. SEW Surface Coating Pvt. Ltd. manufactures special purpose ovens at its factory in Pune, India, and exports them to customers in Indonesia, with erection and commissioning support from our engineers.
What temperature can your special purpose ovens reach?
We manufacture special purpose ovens for processes up to 800°C.
Which processes do these ovens handle?
Baking after flux, bonding, stress relieving and annealing, along with other custom heat processes.
Can the oven be conveyorised?
Yes. Depending on the process, we build batch ovens with trolleys or rail bogies, or continuous ovens with mesh belt or overhead conveyors.
Do you also make coating ovens?
Yes. We manufacture water drying ovens, powder and paint curing ovens, and varnish curing ovens.
How is the plant shipped to Indonesia?
The plant is fabricated at our Pune works, export-packed and shipped from Nhava Sheva (JNPT) port near Mumbai to Jakarta (Tanjung Priok). Our engineers can travel to supervise erection and commissioning.
How do I get a quotation for a special purpose oven in Indonesia?
Send your process type, temperature, component size and weight, and batch or hourly output through our enquiry page, or call +91-99758 35066. Our engineers will prepare a layout and technical offer.
Other Products We Supply in Indonesia
Special Purpose Ovens in Other Countries
- Special Purpose Oven in Malaysia
- Special Purpose Oven in Vietnam
- Special Purpose Oven in Sri Lanka
- Special Purpose Oven in Bangladesh
- Special Purpose Oven in Nepal
- Special Purpose Oven in Oman
- Special Purpose Oven in UAE
- Special Purpose Oven in Qatar
Special Purpose Ovens – main product page | All locations we serve
Need a Special Purpose Oven in Indonesia?
Share your process type, temperature, component size and weight, and batch or hourly output. Our engineers will send a plant layout and technical offer for Indonesia.
Send Your Requirement Contact Us