Special Purpose Oven in Chennai, Tamil Nadu
SEW Surface Coating Pvt. Ltd. designs and manufactures special purpose industrial ovens up to 800°C for manufacturers in Chennai, Tamil Nadu. Every plant is built at our own works in Pune, Maharashtra, then erected and commissioned at your site in Chennai.
Beyond coating lines, we build ovens for heat processes such as baking after flux, bonding, stress relieving and annealing. Each oven is designed around your component, temperature cycle and loading method, whether batch or conveyorised.
- Up to 800°C
- Batch & Conveyorised
- Custom Built
- Supplied across Chennai
Special Purpose Ovens for Chennai's Manufacturing Industry
Chennai is often called the Detroit of India. The Sriperumbudur–Oragadam corridor hosts car, truck and two-wheeler plants, while Ambattur and Guindy have long-established engineering estates and Gummidipoondi has heavy industry.
In Chennai, demand for special purpose ovens comes mainly from automotive and component makers, appliance and HVAC makers and engineering and fabrication units. Heat processes need accurate temperature, even air circulation and a loading method that suits the part. A purpose-built oven gives repeatable results and lower energy use than an off-the-shelf unit.
Component makers and appliance plants in the region run high-volume, conveyorised finishing lines. Chennai is about 1,180 km from our Pune works and plants are delivered by road.
Special Purpose Ovens We Supply in Chennai
Baking Oven After Flux
Ovens for baking components after fluxing, with trolley or conveyor loading to suit your process.
Best for: Brazing and soldering lines.
Bonding Oven
Controlled-temperature ovens for bonding processes, available as batch or continuous conveyor ovens.
Best for: Rubber-to-metal, adhesive and friction material bonding.
Stress Relieving Oven
Ovens that heat fabricated or machined components to relieve residual stress before machining or service.
Best for: Welded fabrications and machined parts.
Annealing Oven
High-temperature ovens up to 800°C for annealing, designed to the material and cycle.
Best for: Metal parts that need softening or grain refinement.
How We Design a Special Purpose Oven
Every special purpose oven is engineered to the job:
- Process StudyTemperature, cycle time and component details.
- Heating DesignHeating system and air circulation for even temperature.
- Loading MethodTrolley, rail bogie, mesh belt or overhead conveyor.
- FabricationBuilt and tested at our Pune works.
- CommissioningInstalled and proven at your site.
Temperature range, chamber size and controls are fixed after we study your process.
Other Ovens We Manufacture
Water Drying Oven
Dries parts completely after the final rinse, since moisture left on the surface spoils the finish.
Powder & Paint Curing Ovens
Batch type, conveyorised conventional or camel back ovens with air-circulating blowers for even temperature.
Industries in Chennai That Use Our Special Purpose Ovens
Automotive & Auto Components
The Sriperumbudur–Oragadam corridor is one of India's largest vehicle manufacturing clusters.
Typical requirement: Bonding and stress relieving ovens for auto components.
Appliances & Electronics
Appliance and electronics plants process cabinets and sheet-metal parts at high volume.
Typical requirement: Flux baking ovens for brazed heat-exchanger and HVAC parts.
Engineering & Fabrication
Ambattur and Guindy have many engineering and fabrication units.
Typical requirement: Stress relieving ovens for welded fabrications.
Railway & Heavy Engineering
Rail coach, wagon and heavy-engineering suppliers process large assemblies.
Typical requirement: Custom oven designed to the process temperature and cycle.
Electrical & Panels
Panel and electrical makers need consistent finishes.
Typical requirement: Baking and curing ovens for electrical components.
Special Purpose Oven Specifications
| Temperature | Up to 800°C |
|---|---|
| Processes | Baking after flux, bonding, stress relieving, annealing |
| Types | Batch and continuous (conveyorised / mesh belt) |
| Loading | Trolley, rail bogie, mesh belt or overhead conveyor |
| Air circulation | Blowers for even temperature across the chamber |
| Controls | Temperature controllers; PLC on request |
| Scope of supply | Design, manufacturing, erection and commissioning |
Final configuration is fixed after we study your component drawings, production rate and available floor space.
From Our Pune Works to Chennai
Plants for Chennai are fabricated and pre-assembled at our factory in Ranje, Pune, about 1,180 km away by road. Equipment is dispatched by road and erected at your site by our team, followed by commissioning and trial runs.
- Site visit and study of components, production rate and space
- Plant layout and process design in minimum floor space
- Fabrication and assembly at our Pune factory
- Dispatch, erection and commissioning at your site
- Trial runs and after-sales service support
Why Buyers in Chennai Choose SEW Surface Coating
In-house manufacturing since 1996
Our own fabrication unit in Pune gives one-roof control over design, quality and delivery commitments.
25+ years in coating systems
More than two and a half decades of experience in powder and liquid painting systems for automobile, appliance, electrical, furniture and other industries.
Layouts in minimum space
We specialise in fitting a complete line into the floor space you actually have.
Low running cost
Plants are engineered for low fuel consumption, with options such as camel back ovens, solar-assisted heating and Waste Heat Recovery Systems (WHRS).
Modern technology
Nano-technology spray pretreatment, PLC-controlled transporters and SCADA monitoring are part of our installed base.
Erection to after-sales
We stay with the project from plant purchase through erection, commissioning and service support.
Industrial Areas We Serve in and Around Chennai
Special Purpose Oven in Chennai – Frequently Asked Questions
Do you supply special purpose ovens in Chennai?
Yes. SEW Surface Coating Pvt. Ltd. manufactures special purpose ovens at its factory in Pune and supplies, erects and commissions them for customers across Chennai, Tamil Nadu.
What temperature can your special purpose ovens reach?
We manufacture special purpose ovens for processes up to 800°C.
Which processes do these ovens handle?
Baking after flux, bonding, stress relieving and annealing, along with other custom heat processes.
Can the oven be conveyorised?
Yes. Depending on the process, we build batch ovens with trolleys or rail bogies, or continuous ovens with mesh belt or overhead conveyors.
Do you also make coating ovens?
Yes. We manufacture water drying ovens, powder and paint curing ovens, and varnish curing ovens.
How is the plant delivered and installed in Chennai?
The plant is fabricated at our Pune works, about 1,180 km from Chennai by road. It is dispatched to your site, where our team erects and commissions it and carries out trial runs.
How do I get a quotation for a special purpose oven in Chennai?
Send your process type, temperature, component size and weight, and batch or hourly output through our enquiry page, or call +91-99758 35066. Our engineers will prepare a layout and technical offer.
Other Products We Supply in Chennai
Special Purpose Ovens in Other Locations
- Special Purpose Oven in Hosur
- Special Purpose Oven in Bengaluru
- Special Purpose Oven in Coimbatore
- Special Purpose Oven in Hyderabad
- Special Purpose Oven in Visakhapatnam
- Special Purpose Oven in Kolhapur
- Special Purpose Oven in Satara
- Special Purpose Oven in Nagpur
Special Purpose Ovens – main product page | All locations we serve
Need a Special Purpose Oven in Chennai?
Share your process type, temperature, component size and weight, and batch or hourly output. Our engineers will send a plant layout and technical offer for Chennai.
Send Your Requirement Contact Us