Pressurization Zone in Vadodara, Gujarat
SEW Surface Coating Pvt. Ltd. designs, manufactures and installs pressurization zones (pressurization chambers) for manufacturers in Vadodara, Gujarat. Every plant is built at our own works in Pune, Maharashtra, then erected and commissioned at your site in Vadodara.
A pressurization chamber is built around the powder coating booth or paint booth to keep dust off the components. Atmospheric fresh air is drawn in, filtered in two or three stages and delivered from a plenum chamber around the booth area, so the room stays under positive pressure.
- 2 or 3-Stage Filtration
- Powder & Paint Booths
- Dust-Free Finish
- Supplied across Vadodara
Pressurization Zones for Vadodara's Manufacturing Industry
Vadodara is a major centre for engineering, electrical equipment and process industries. Makarpura, Por, Savli and Waghodia GIDCs host transformer, switchgear, heavy-engineering and process-equipment makers, while Halol has a large automotive presence.
In Vadodara, demand for pressurization zones comes mainly from electrical and panel makers, engineering and fabrication units and automotive and component makers. Dust settling on wet paint or uncured powder shows up as specks and craters, and those parts have to be reworked. Keeping the booth area under filtered positive pressure stops outside dust from getting in, which matters most for high-gloss and appearance-critical parts.
Many units here build heavy equipment for power, oil and gas and chemical plants. Vadodara is about 560 km from our Pune works by road.
Pressurization Zones We Supply in Vadodara
Pressurization Chamber for Powder Booths
An enclosed, panelled room around the powder booth with filtered fresh air supplied from a plenum.
Best for: Powder coating lines with appearance-critical parts.
Pressurization Chamber for Paint Booths
The same filtered-air enclosure built around liquid painting booths to keep dust off wet paint.
Best for: Liquid painting lines for high-gloss finishes.
How a Pressurization Zone Works
- Fresh Air IntakeAtmospheric air is drawn in by the supply fan.
- Stage 1 FilterCoarse filtration removes larger dust.
- Stage 2 / 3 FilterFiner filtration cleans the air further.
- Plenum ChamberFiltered air is delivered evenly around the booth.
- Positive PressureRoom pressure keeps outside dust from entering.
Air volume, filter stages and room size are designed around your booth size and conveyor openings.
Equipment Supplied With the Pressurization Zone
Powder Coating Booth
Electrostatic powder booth with mono-cyclone or multi-cyclone recovery and after filter unit.
Liquid Painting Booth
Dry booths, side draft and downdraft water-wall booths, and dip painting tanks with paint curing ovens.
Curing Oven
Batch type, conveyorised conventional or camel back ovens with air-circulating blowers for even temperature.
Pretreatment Plant
Dip or spray pretreatment cleans and phosphates the metal surface so the coating adheres well and resists corrosion.
Industries in Vadodara That Use Our Pressurization Zones
Transformers & Switchgear
Vadodara is one of India's key centres for transformers, switchgear and power equipment.
Typical requirement: Pressurized booth room for enclosures with high-gloss finishes.
Heavy & Process Engineering
Process equipment and heavy fabrication units serve chemical and refinery projects.
Typical requirement: Pressurization zone sized to the booth and conveyor openings.
Automotive
Halol has vehicle and component plants with a growing supplier base.
Typical requirement: Pressurization zone around automated powder or paint booths for visible parts.
Oil & Gas Equipment
Makers of vessels, skids and piping supply the refinery and petrochemical industry.
Typical requirement: Pressurization zone sized to the booth and conveyor openings.
Motors & Transformers
Transformer and motor makers need varnishing of windings and coils.
Typical requirement: Pressurization zone sized to the booth and conveyor openings.
Pressurization Zone Specifications
| Application | Around powder coating booths and paint booths |
|---|---|
| Filtration | Fresh air filtered in two or three stages |
| Air delivery | Plenum chamber around the booth area |
| Construction | Panelled enclosure with doors and conveyor openings |
| Benefit | Dust-free coating and fewer rejections |
| Scope of supply | Design, manufacturing, erection and commissioning |
Final configuration is fixed after we study your component drawings, production rate and available floor space.
From Our Pune Works to Vadodara
Plants for Vadodara are fabricated and pre-assembled at our factory in Ranje, Pune, about 560 km away by road. Equipment is dispatched by road and erected at your site by our team, followed by commissioning and trial runs.
- Site visit and study of components, production rate and space
- Plant layout and process design in minimum floor space
- Fabrication and assembly at our Pune factory
- Dispatch, erection and commissioning at your site
- Trial runs and after-sales service support
Why Buyers in Vadodara Choose SEW Surface Coating
In-house manufacturing since 1996
Our own fabrication unit in Pune gives one-roof control over design, quality and delivery commitments.
25+ years in coating systems
More than two and a half decades of experience in powder and liquid painting systems for automobile, appliance, electrical, furniture and other industries.
Layouts in minimum space
We specialise in fitting a complete line into the floor space you actually have.
Low running cost
Plants are engineered for low fuel consumption, with options such as camel back ovens, solar-assisted heating and Waste Heat Recovery Systems (WHRS).
Modern technology
Nano-technology spray pretreatment, PLC-controlled transporters and SCADA monitoring are part of our installed base.
Erection to after-sales
We stay with the project from plant purchase through erection, commissioning and service support.
Industrial Areas We Serve in and Around Vadodara
Pressurization Zone in Vadodara – Frequently Asked Questions
Do you supply pressurization zones in Vadodara?
Yes. SEW Surface Coating Pvt. Ltd. manufactures pressurization zones at its factory in Pune and supplies, erects and commissions them for customers across Vadodara, Gujarat.
What is a pressurization zone in a coating plant?
It is an enclosure built around the powder coating or paint booth. Filtered fresh air is supplied from a plenum so the room stays under positive pressure and dust stays out.
How many filter stages are used?
Atmospheric air is filtered in two or three stages, depending on the finish quality required.
Can it be added to an existing booth?
Yes. We can design a pressurization chamber around your existing powder coating booth or paint booth, subject to the space available.
Which parts benefit most?
High-gloss, appearance-critical parts such as appliance panels, auto parts and architectural sections, where dust specks cause rework.
How is the plant delivered and installed in Vadodara?
The plant is fabricated at our Pune works, about 560 km from Vadodara by road. It is dispatched to your site, where our team erects and commissions it and carries out trial runs.
How do I get a quotation for a pressurization zone in Vadodara?
Send your booth size, conveyor openings, available space and finish requirement through our enquiry page, or call +91-99758 35066. Our engineers will prepare a layout and technical offer.
Other Products We Supply in Vadodara
Pressurization Zones in Other Locations
- Pressurization Zone in Ahmedabad
- Pressurization Zone in Surat
- Pressurization Zone in Vapi
- Pressurization Zone in Rajkot
- Pressurization Zone in Nashik
- Pressurization Zone in Indore
- Pressurization Zone in Thane
- Pressurization Zone in Aurangabad
Pressurization Zones – main product page | All locations we serve
Need a Pressurization Zone in Vadodara?
Share your booth size, conveyor openings, available space and finish requirement. Our engineers will send a plant layout and technical offer for Vadodara.
Send Your Requirement Contact Us