CED Coating Plant in Bangladesh
SEW Surface Coating Pvt. Ltd. designs, manufactures and installs CED (cathodic electro-deposition) coating plants for manufacturers in Bangladesh. Every plant is built at our own works in Pune, India, then export-packed and shipped to Bangladesh, with erection and commissioning support from our engineers.
CED is a water-based primer coating used mostly in automotive paint shops. Charged paint particles move to the component (the cathode) under a direct current, so paint reaches every corner of complex shapes. Un-deposited paint is rinsed and recovered through ultra-filtration (UF), and the film becomes hard after baking.
- Batch & Conveyorised
- UF Paint Recovery
- 1200+ hrs Salt Spray
- Exported to Bangladesh
CED Coating Plants for Bangladesh's Industry
Bangladesh's manufacturing extends well beyond garments. Dhaka, Gazipur, Savar, Narayanganj and Chattogram host steel, furniture, electrical, appliance, motorcycle assembly and light-engineering industries, along with export processing zones.
In Bangladesh, demand for CED coating plants comes mainly from appliance and HVAC makers, furniture and storage makers and electrical and panel makers. CED primer gives uniform film thickness, full coverage inside box sections and sharp edges, and salt spray resistance of more than 1200 hours. Paint utilisation is close to 100 percent, and because the process is water-based it carries less fire risk than solvent coatings.
Appliance, electrical and light-engineering makers are adding conveyorised coating lines to replace imports.
Types of CED Coating Plants We Supply in Bangladesh
Batch Type (Dip Tanks)
Components are loaded in jigs and moved through dip tanks by hoist or PLC-controlled transporter.
Best for: Mixed components and medium volumes.
Continuous Conveyorised
An overhead conveyor carries parts through pretreatment, the CED tank, UF rinses and the baking oven without stopping.
Best for: High-volume automotive and component production.
Combination of Dip and Spray
Spray stages for cleaning and rinsing are combined with dip stages for phosphating and CED, to suit the part and output.
Best for: Lines that need both throughput and full coverage.
CED Coating Process Sequence
The CED process on our plants follows this sequence:
- LoadParts are hung on jigs or the conveyor.
- DegreaseRemoves oil and grease.
- Water Rinse 1 / 2Two rinses after degreasing.
- ActivationPrepares the surface for phosphating.
- PhosphateBuilds the conversion coating.
- DM Water Rinse 1 / 2Clean demineralised water rinses.
- CEDElectro-deposition of primer.
- UF 1 and UF 2Ultra-filtrate rinses recover un-deposited paint.
- DM Water Rinse 3Final rinse before baking.
- Baking OvenThe film is baked hard.
- UnloadParts are inspected and unloaded.
Fully automatic operation needs less manual effort and allows the film thickness to be controlled.
Advantages of CED Over Conventional Primer
Uniform coating
Controlled film thickness and better coverage on interior surfaces, complex shapes and sharp corners.
No runs or sags
No runs, sags or solvent boils, giving a consistent primer surface.
Corrosion resistance
Surface salt spray resistance lasts for more than 1200 hours.
About 100% paint utilisation
UF recovers un-deposited paint, which makes the process cost effective.
Safer and cleaner
Water-based process with less fire risk and fewer pollution and health hazards than solvent coatings.
Industries in Bangladesh That Use Our CED Coating Plants
Appliances & Electronics
Appliance makers process fridges, ACs and sheet-metal parts.
Typical requirement: CED primer for appliance and HVAC parts that need high corrosion resistance.
Steel Furniture
Furniture makers serve domestic and export markets.
Typical requirement: Batch or conveyorised CED line sized to the component and output.
Electrical & Panels
Electrical makers supply power and buildings.
Typical requirement: Batch or conveyorised CED line sized to the component and output.
Motorcycles & Bicycles
Assemblers and part makers coat frames and parts.
Typical requirement: Conveyorised CED for frames and two-wheeler parts.
Steel Structures
Steel fabricators supply construction.
Typical requirement: Batch or conveyorised CED line sized to the component and output.
CED Coating Plant Specifications
| Plant types | Batch (dip tanks), continuous conveyorised, or combination of dip and spray |
|---|---|
| Process | Degrease, rinses, activation, phosphate, DM rinses, CED, UF 1 and UF 2, DM rinse, baking oven |
| Paint recovery | Ultra-filtration (UF) equipment |
| Material handling | Hoist, PLC-controlled transporter or overhead conveyor |
| Corrosion performance | Salt spray resistance of more than 1200 hours |
| Controls | Automatic operation; PLC and SCADA on request |
| Scope of supply | Design, manufacturing, erection and commissioning |
Final configuration is fixed after we study your component drawings, production rate and available floor space.
From Our Pune Works to Bangladesh
Plants for Bangladesh are fabricated and pre-assembled at our factory in Ranje, Pune, India. They are export-packed and shipped from Nhava Sheva (JNPT) port near Mumbai to Chattogram, or by road via Benapole, and our engineers can travel to supervise erection and commissioning at your site.
- Technical study from your drawings, component details and production data
- Plant layout and process design in minimum floor space
- Fabrication and inspection at our Pune works
- Export packing and shipping documentation
- Erection and commissioning supervision by our engineers
Why Buyers in Bangladesh Choose SEW Surface Coating
In-house manufacturing since 1996
Our own fabrication unit in Pune gives one-roof control over design, quality and delivery commitments.
25+ years in coating systems
More than two and a half decades of experience in powder and liquid painting systems for automobile, appliance, electrical, furniture and other industries.
Layouts in minimum space
We specialise in fitting a complete line into the floor space you actually have.
Low running cost
Plants are engineered for low fuel consumption, with options such as camel back ovens, solar-assisted heating and Waste Heat Recovery Systems (WHRS).
Modern technology
Nano-technology spray pretreatment, PLC-controlled transporters and SCADA monitoring are part of our installed base.
Export experience
We handle export packing and documentation and support erection and commissioning for customers in Bangladesh.
Industrial Areas We Serve in Bangladesh
CED Coating Plant in Bangladesh – Frequently Asked Questions
Do you export CED coating plants to Bangladesh?
Yes. SEW Surface Coating Pvt. Ltd. manufactures CED coating plants at its factory in Pune, India, and exports them to customers in Bangladesh, with erection and commissioning support from our engineers.
What is CED coating?
Cathodic electro-deposition (CED) is a water-based primer coating. Charged paint particles move to the component under direct current, so paint reaches every corner, and the film becomes hard after baking.
What is the role of UF in a CED plant?
Ultra-filtration separates paint ingredients that do not form film and recovers un-deposited paint from the rinses, which gives close to 100 percent paint utilisation.
How much corrosion resistance does CED give?
The baked CED film gives surface salt spray resistance of more than 1200 hours.
Can the CED plant be automatic?
Yes. CED lines run on a PLC-controlled transporter or a continuous conveyor, with automatic operation and controlled film thickness.
How is the plant shipped to Bangladesh?
The plant is fabricated at our Pune works, export-packed and shipped from Nhava Sheva (JNPT) port near Mumbai to Chattogram, or by road via Benapole. Our engineers can travel to supervise erection and commissioning.
How do I get a quotation for a CED coating plant in Bangladesh?
Send your component size and weight, production rate and topcoat requirement through our enquiry page, or call +91-99758 35066. Our engineers will prepare a layout and technical offer.
Other Products We Supply in Bangladesh
CED Coating Plants in Other Countries
- CED Coating Plant in Nepal
- CED Coating Plant in Sri Lanka
- CED Coating Plant in Vietnam
- CED Coating Plant in Malaysia
- CED Coating Plant in Oman
- CED Coating Plant in UAE
- CED Coating Plant in Indonesia
- CED Coating Plant in Qatar
CED Coating Plants – main product page | All locations we serve
Need a CED Coating Plant in Bangladesh?
Share your component size and weight, production rate and topcoat requirement. Our engineers will send a plant layout and technical offer for Bangladesh.
Send Your Requirement Contact Us