CED Coating Plant in Bahrain
SEW Surface Coating Pvt. Ltd. designs, manufactures and installs CED (cathodic electro-deposition) coating plants for manufacturers in Bahrain. Every plant is built at our own works in Pune, India, then export-packed and shipped to Bahrain, with erection and commissioning support from our engineers.
CED is a water-based primer coating used mostly in automotive paint shops. Charged paint particles move to the component (the cathode) under a direct current, so paint reaches every corner of complex shapes. Un-deposited paint is rinsed and recovered through ultra-filtration (UF), and the film becomes hard after baking.
- Batch & Conveyorised
- UF Paint Recovery
- 1200+ hrs Salt Spray
- Exported to Bahrain
CED Coating Plants for Bahrain's Industry
Bahrain has a strong aluminium and downstream metals industry, along with fabrication, electrical and building products. Hidd, Sitra, Salman Industrial City and Bahrain International Investment Park host most manufacturers.
In Bahrain, demand for CED coating plants comes mainly from aluminium fabricators, steel structure fabricators and electrical and panel makers. CED primer gives uniform film thickness, full coverage inside box sections and sharp edges, and salt spray resistance of more than 1200 hours. Paint utilisation is close to 100 percent, and because the process is water-based it carries less fire risk than solvent coatings.
Aluminium extruders and fabricators here need pretreatment and powder coating for architectural and industrial profiles.
Types of CED Coating Plants We Supply in Bahrain
Batch Type (Dip Tanks)
Components are loaded in jigs and moved through dip tanks by hoist or PLC-controlled transporter.
Best for: Mixed components and medium volumes.
Continuous Conveyorised
An overhead conveyor carries parts through pretreatment, the CED tank, UF rinses and the baking oven without stopping.
Best for: High-volume automotive and component production.
Combination of Dip and Spray
Spray stages for cleaning and rinsing are combined with dip stages for phosphating and CED, to suit the part and output.
Best for: Lines that need both throughput and full coverage.
CED Coating Process Sequence
The CED process on our plants follows this sequence:
- LoadParts are hung on jigs or the conveyor.
- DegreaseRemoves oil and grease.
- Water Rinse 1 / 2Two rinses after degreasing.
- ActivationPrepares the surface for phosphating.
- PhosphateBuilds the conversion coating.
- DM Water Rinse 1 / 2Clean demineralised water rinses.
- CEDElectro-deposition of primer.
- UF 1 and UF 2Ultra-filtrate rinses recover un-deposited paint.
- DM Water Rinse 3Final rinse before baking.
- Baking OvenThe film is baked hard.
- UnloadParts are inspected and unloaded.
Fully automatic operation needs less manual effort and allows the film thickness to be controlled.
Advantages of CED Over Conventional Primer
Uniform coating
Controlled film thickness and better coverage on interior surfaces, complex shapes and sharp corners.
No runs or sags
No runs, sags or solvent boils, giving a consistent primer surface.
Corrosion resistance
Surface salt spray resistance lasts for more than 1200 hours.
About 100% paint utilisation
UF recovers un-deposited paint, which makes the process cost effective.
Safer and cleaner
Water-based process with less fire risk and fewer pollution and health hazards than solvent coatings.
Industries in Bahrain That Use Our CED Coating Plants
Aluminium Extrusions
Downstream aluminium makers produce profiles and building products.
Typical requirement: Batch or conveyorised CED line sized to the component and output.
Steel Fabrication
Fabricators supply construction and industry.
Typical requirement: Batch or conveyorised CED line sized to the component and output.
Electrical & Panels
Panel makers supply building and power projects.
Typical requirement: Batch or conveyorised CED line sized to the component and output.
Oil & Gas Equipment
Fabricators serve the refinery and energy sector.
Typical requirement: Batch or conveyorised CED line sized to the component and output.
Steel Furniture
Furniture makers serve the local market.
Typical requirement: Batch or conveyorised CED line sized to the component and output.
CED Coating Plant Specifications
| Plant types | Batch (dip tanks), continuous conveyorised, or combination of dip and spray |
|---|---|
| Process | Degrease, rinses, activation, phosphate, DM rinses, CED, UF 1 and UF 2, DM rinse, baking oven |
| Paint recovery | Ultra-filtration (UF) equipment |
| Material handling | Hoist, PLC-controlled transporter or overhead conveyor |
| Corrosion performance | Salt spray resistance of more than 1200 hours |
| Controls | Automatic operation; PLC and SCADA on request |
| Scope of supply | Design, manufacturing, erection and commissioning |
Final configuration is fixed after we study your component drawings, production rate and available floor space.
From Our Pune Works to Bahrain
Plants for Bahrain are fabricated and pre-assembled at our factory in Ranje, Pune, India. They are export-packed and shipped from Nhava Sheva (JNPT) port near Mumbai to Khalifa Bin Salman Port, and our engineers can travel to supervise erection and commissioning at your site.
- Technical study from your drawings, component details and production data
- Plant layout and process design in minimum floor space
- Fabrication and inspection at our Pune works
- Export packing and shipping documentation
- Erection and commissioning supervision by our engineers
Why Buyers in Bahrain Choose SEW Surface Coating
In-house manufacturing since 1996
Our own fabrication unit in Pune gives one-roof control over design, quality and delivery commitments.
25+ years in coating systems
More than two and a half decades of experience in powder and liquid painting systems for automobile, appliance, electrical, furniture and other industries.
Layouts in minimum space
We specialise in fitting a complete line into the floor space you actually have.
Low running cost
Plants are engineered for low fuel consumption, with options such as camel back ovens, solar-assisted heating and Waste Heat Recovery Systems (WHRS).
Modern technology
Nano-technology spray pretreatment, PLC-controlled transporters and SCADA monitoring are part of our installed base.
Export experience
We handle export packing and documentation and support erection and commissioning for customers in Bahrain.
Industrial Areas We Serve in Bahrain
CED Coating Plant in Bahrain – Frequently Asked Questions
Do you export CED coating plants to Bahrain?
Yes. SEW Surface Coating Pvt. Ltd. manufactures CED coating plants at its factory in Pune, India, and exports them to customers in Bahrain, with erection and commissioning support from our engineers.
What is CED coating?
Cathodic electro-deposition (CED) is a water-based primer coating. Charged paint particles move to the component under direct current, so paint reaches every corner, and the film becomes hard after baking.
What is the role of UF in a CED plant?
Ultra-filtration separates paint ingredients that do not form film and recovers un-deposited paint from the rinses, which gives close to 100 percent paint utilisation.
How much corrosion resistance does CED give?
The baked CED film gives surface salt spray resistance of more than 1200 hours.
Can the CED plant be automatic?
Yes. CED lines run on a PLC-controlled transporter or a continuous conveyor, with automatic operation and controlled film thickness.
How is the plant shipped to Bahrain?
The plant is fabricated at our Pune works, export-packed and shipped from Nhava Sheva (JNPT) port near Mumbai to Khalifa Bin Salman Port. Our engineers can travel to supervise erection and commissioning.
How do I get a quotation for a CED coating plant in Bahrain?
Send your component size and weight, production rate and topcoat requirement through our enquiry page, or call +91-99758 35066. Our engineers will prepare a layout and technical offer.
Other Products We Supply in Bahrain
CED Coating Plants in Other Countries
- CED Coating Plant in Qatar
- CED Coating Plant in Saudi Arabia
- CED Coating Plant in Kuwait
- CED Coating Plant in UAE
- CED Coating Plant in Oman
- CED Coating Plant in Egypt
- CED Coating Plant in Ethiopia
- CED Coating Plant in Kenya
CED Coating Plants – main product page | All locations we serve
Need a CED Coating Plant in Bahrain?
Share your component size and weight, production rate and topcoat requirement. Our engineers will send a plant layout and technical offer for Bahrain.
Send Your Requirement Contact Us